Friction stir butt welding of Al-Cu bilayer laminated composites: analysis of force, torque, and temperature

详细信息    查看全文

• 作者：R. Beygi ; M. Kazeminezhad…
• 关键词：Friction stir welding ; Al ; Cu laminated composite ; Axial load and torque ; Material flow
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：88
• 期：1-4
• 页码：393-400
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering; Media Management; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design;
• 出版者：Springer London
• ISSN：1433-3015
• 卷排序：88

文摘

The effect of the layer in contact with tool (Al or Cu) and the depth of plunge on friction stir butt welding of Al-Cu bilayer laminated composites produced by cold roll welding were studied. The measurement of weld cross sections and variations of the axial load and torque during welding process showed that material flow is influenced by the material which is in contact with the shoulder. Being Al layer in contact with the shoulder led to higher force and torque during welding, and a defect-free weld could be obtained in this manner. By welding from Cu side, a higher plunge depth was needed to develop enough force and torque and thereby a defect-free weld. The amount of material swept by the shoulder and flow stress of the material in contact with shoulder have determined the force and torque and also temperature during welding.