Fabrication of acrylic copolymer with aluminum nitride fillers and its physical and thermal properties

详细信息    查看全文

• 作者：Deoukchen Ghim ; Jung Hyeun Kim
• 关键词：Thermal Conductivity ; Adhesive ; Adhesion ; Polymers ; Composites
• 刊名：Korean Journal of Chemical Engineering
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：34
• 期：1
• 页码：245-248
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Industrial Chemistry/Chemical Engineering; Catalysis; Materials Science, general; Biotechnology;
• 出版者：Springer US
• ISSN：1975-7220
• 卷排序：34

文摘

Heat dissipation during operations of electronic devices is a serious issue with device miniaturization and high power consumption. As one practical approach to reducing the device temperature, thermally conductive adhesives can be used between printed circuit board and heatsink materials. By incorporating the aluminum nitride (AlN) with acrylic copolymer matrix, thermal conductivity and adhesive properties are examined with different sizes and content of particulate fillers. Acrylic copolymer is synthesized using butyl acrylate and acrylic acid monomers via solution polymerization, and AlN particles are used as thermally conductive fillers. The overall monomer conversion reaches more than 96% after 140 min reaction time. Considering both adhesive properties and thermal conductivity of adhesives, it is desirable to apply 20 wt% nano-AlN filler to acrylic copolymer adhesives.