Three-dimensional LES modeling of induced gas motion under the influence of injection pressure and ambient density in an ultrahigh-pressure diesel injector

详细信息    查看全文

• 作者：Mahdi Yousefifard ; Parviz Ghadimi…
• 关键词：Diesel spray ; Induced gas motion ; High injection pressure ; Ambient gas entrainment ; LES turbulent model ; OpenFOAM
• 刊名：Journal of the Brazilian Society of Mechanical Sciences and Engineering
• 出版年：2015
• 出版时间：July 2015
• 年：2015
• 卷：37
• 期：4
• 页码：1235-1243
• 全文大小：2,780 KB
• 参考文献：1.Roisman IV, Araneo L, Tropea C (2007) Effect of ambient pressure on penetration of a diesel spray. Int J Multiph Flow 33:904-20View Article
  2.Ghurri A, Kim J, Kim HG et al (2012) The effect of injection pressure and fuel viscosity on the spray characteristics of biodiesel blends injected into an atmospheric chamber. J Mech Sci Technol 26(9):2941-947View Article
  3.Wang X, Huang Z, Kuti OA et al (2010) Experimental and analytical study on biodiesel and diesel spray characteristics under ultra-high injection pressure. Int J Heat Fluid Flow 31:659-66View Article
  4.Zhu J, Kuti OA, Nishida K (2013) An investigation of the effects of fuel injection pressure, ambient gas density and nozzle hole diameter on surrounding gas flow of a single diesel spray by the laser-induced fluorescence-particle image velocimetry technique. Int J Engine Res 14(6):630-45View Article
  5.Sepret V, Bazile R, Marchal M (2010) Effect of ambient density and orifice diameter on gas entrainment by a single-hole diesel spray. Exp Fluids 49:1293-305View Article
  6.Demoulin FX, Borghi R (2002) Modeling of turbulent spray combustion with application to diesel like experiment. Combust Flame 129(3):281-93View Article
  7.Moreira A, Moita A, Panao M (2010) Advances and challenges explaining fuel spray impingement: how much of single droplet impact research is useful? Prog Energy Combust Sci 36:554-80View Article
  8.Som S, Aggarwal SK (2010) Effects of primary breakup modeling on spray and combustion characteristics of compression ignition engines. Combust Flame 157:1179-193View Article
  9.Yousefifard M, Ghadimi P, Mirsalim M (2014) Numerical simulation of biodiesel spray under ultra-high injection pressure using OpenFOAM. J Braz Soc Mech Sci Eng. doi:10.-007/?s40430-014-0199-y
  10.Zhang J, Fang T (2011) Spray combustion of biodiesel and diesel in a constant volume combustion chamber. SAE paper 2011-01-1380
  11.Stiesch G (2003) Modeling engine spray and combustion processes. Springer, Berlin
  12.Rutland CJ (2011) Large-eddy simulations for internal combustion engines—a review. Int J Engine Res 12:1-1
  13.Zhou L, Xie MZ, Jia M, Shi JR (2011) Large eddy simulation of fuel injection and mixing process in a diesel engine. Acta Mech Sin 27(4):519-30View Article
  14.Kaario O, Vuorinen V, Hulkkonen T et al (2013) Large eddy simulation of high gas density effects in fuel sprays. At Sprays 23(4):297-25View Article
  15.Jones WP, Lettieri C (2010) Large eddy simulation of spray atomization with stochastic modeling of breakup. Phys Fluids 22:115106View Article
  16.Hori T, Kuge T, Senda J, Fujimoto H (2006) Large eddy simulation of non-evaporative and evaporative diesel spray in constant volume vessel by use of KIVALES. In: SAEPaper, 2006-01-3334
  17.Irannejad A, Jaberi F (2014) Large eddy simulation of turbulent spray breakup and evaporation. Int J Multiph Flow 61:108-28MathSciNet View Article
  18.Gjesing R, Hattel J, Fritsching U (2009) Coupled atomization and spray modelling in the spray forming process using OpenFOAM. Eng Appl Comput Fluid Mech 3(4):471-86
  19.Kassem HI, Saqr KM, Aly HS et al (2011) Implementation of the eddy dissipation model of turbulent non-premixed combustion in OpenFOAM. Int Commun Heat Mass Transfer 38:363-67View Article
  20.Nowruzi H, Ghadimi P, Yousefifard M (2014) A numerical study of spray characteristics in medium speed engine fueled by different HFO/n-butanol blends. Int J Chem Eng. Article ID 702890
  21.Vuorinen V, Duwig C, Fuchs L et al (2011) Large-eddy simulation of a compressible spray using Eulerian–Eulerian approach. In: 24th European conference on liquid atomization and spray systems, 5- September 2011, Estoril, Portugal
  22.Basha SA, Gopal KR (2009) In-cylinder fluid flow, turbulence and spray models—a review. Renew Sustain Energy Rev 13:1620-627View Article
  23.Ghasemi A, Barron RM, Balachandar R (2014) Spray-induced air motion in single and twin ultra-high injection diesel sprays. Fuel 121:284-97View Article
  24.Banerjee S, Rutland CH (2012) Study of spray induced turbulence using large eddy simulations. In: ILASS Americas, 24th annual conference on liquid atomization and spray Systems, San Antonio, TX, May 2012
  25.Pope SB (2001) Turbulent flows. Cambridge University Press, Cambridge
  26.Gong Y, Tanner F, Kaario O et al (2010) Large eddy simulations of hydrotreated vegetable oil sprays using OpenFOAM. In: International multidimensional engine modeling meeting at the SAE Congress, Detroit, Michigan
  27.Crowe CT, Schwarzkof JD, Sommerfeld M, Tsuji Y (2012) Multiphase flows with droplets and particles, 2nd edn. CRC Press, Boca Raton
  28.Turner MR, Sazhin SS, Healey JJ et al (2012) A breakup model for transient diesel fuel sprays. Fuel 97:288-05View Article
  29.Reitz RD (1987) Modeling atomization processes in high-pressure vaporizing sprays. At Spray Technol 3:309-37
  30.Beale JC, Reitz RD (1999) Modeling spray atomization w
• 作者单位：Mahdi Yousefifard (1)
  Parviz Ghadimi (1)
  Hashem Nowruzi (1)
  
  1. Department of Marine Technology, Amirkabir University of Technology, Hafez Ave, No 424, P.O. Box 15875-4413, Tehran, Iran
  
• 刊物主题：Mechanical Engineering;
• 出版者：Springer Berlin Heidelberg
• ISSN：1806-3691

文摘

Detailed three-dimensional numerical simulations have been performed to analyze gas motion generated by dispersion of non-evaporating ultrahigh-pressure diesel spray. Fuel–air mixing is studied under different injection pressures and ambient densities, based on Eulerian–Lagrangian scheme. Large eddy simulation (LES) turbulence model along with an advanced primary breakup scheme have been applied to model the two-phase flow. The freeware code OpenFOAM is implemented to study the effects of the injection pressure and ambient density on gas motion. To evaluate the capability of the LES method in the simulation of gas motion in a high-pressure injection chamber, the obtained results were validated against published experimental data. Also, spray characteristics have been presented and induced gas velocities compared with experimental data. There are temporal variations in the gas movement around the spray. Based on the reported literature, gas velocity field around the spray is divided into three different zones: quasi static zone, gas recirculation zone, and head vortex zone. Accordingly, induced gas motions that are affected by the spray tip velocity are different in these areas. 3-D plots of spray liquid volume fraction and gas velocity vectors have also been presented. Overall, numerical results have displayed good agreement with the experimental data. It is concluded that LES is quite capable of reproducing the turbulent structures in gas field, mainly in ultrahigh-pressure injection.