Separation of Ni²⁺ from ammonia solution through a supported liquid membrane impregnated with Acorga M5640

详细信息    查看全文

• 作者：Hengpan Duan ; Xiaohong Yuan ; Qin Zhang ; Ziyue Wang ; Zhangjie Huang…
• 关键词：Supported liquid membrane ; Ni2+ ; Ammonia solution ; Acorga M5640
• 刊名：Chemical Papers
• 出版年：2017
• 出版时间：March 2017
• 年：2017
• 卷：71
• 期：3
• 页码：597-606
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry/Food Science, general; Industrial Chemistry/Chemical Engineering; Biochemistry, general; Medicinal Chemistry; Materials Science, general; Biotechnology;
• 出版者：Springer International Publishing
• ISSN：1336-9075
• 卷排序：71

文摘

Separation of Ni2+ from ammonia/ammonium chloride solution using a flat-sheet supported liquid membrane (SLM) impregnated with Acorga M5640 in kerosene was investigated. The fundamental experimental variables influencing Ni2+ transport, such as ammonia concentration, carrier concentration, H₂SO₄ concentration in the stripping solution, stirring speed, and initial Ni2+ concentration were studied. Almost all of Ni2+ was transported from the feed to the stripping phase after 18 h of operation with a permeability coefficient of 9.28 × 10−6 m s−1 under optimum conditions: stirring speed of 1000 rpm in both phases, 20 vol.% Acorga M5640 as the carrier, 1.70 mmol L−1 Ni2+ in the feed phase and 0.10 mol L−1 H₂SO₄ in the stripping phase. The flux value of Ni2+ was 15.82 × 10−6 mol m−2 s−1. Additionally, the influences of temperature and ultrasound on flux were examined, and results indicated that higher temperature and ultrasonic assistance improved transport of Ni2+ through the SLM. Selective separation of nickel from cobalt in an ammonia/ammonium chloride solution was also achieved through SLM. The stability of the SLM was examined on a continuous run mode and satisfactory stability of the nickel permeation was observed for 84 h (7 runs).