Improved design of special boundary elements for T-shaped reinforced concrete walls

详细信息    查看全文

• 作者：Xiaodong Ji ; Dan Liu ; Jiaru Qian
• 关键词：code comparison ; displacement ; based method ; seismic design ; special boundary element ; T ; shaped wall
• 刊名：Earthquake Engineering and Engineering Vibration
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：16
• 期：1
• 页码：83-95
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Geotechnical Engineering & Applied Earth Sciences; Civil Engineering; Vibration, Dynamical Systems, Control;
• 出版者：Institute of Engineering Mechanics, China Earthquake Administration
• ISSN：1993-503X
• 卷排序：16

文摘

This study examines the design provisions of the Chinese GB 50011-2010 code for seismic design of buildings for the special boundary elements of T-shaped reinforced concrete walls and proposes an improved design method. Comparison of the design provisions of the GB 50011-2010 code and those of the American code ACI 318-14 indicates a possible deficiency in the T-shaped wall design provisions in GB 50011-2010. A case study of a typical T-shaped wall designed in accordance with GB 50011-2010 also indicates the insufficient extent of the boundary element at the non-flange end and overly conservative design of the flange end boundary element. Improved designs for special boundary elements of T-shaped walls are developed using a displacement-based method. The proposed design formulas produce a longer boundary element at the non-flange end and a shorter boundary element at the flange end, relative to those of the GB 50011-2010 provisions. Extensive numerical analysis indicates that T-shaped walls designed using the proposed formulas develop inelastic drift of 0.01 for both cases of the flange in compression and in tension.