Stress, microstructure and mechanical properties of graded multilayer tetrahedral amorphous carbon films

详细信息    查看全文

• 作者：Xiao Han ; Jiaqi Zhu ; Jiecai Han ; Manlin Tan and Wei Gao
• 刊名：Applied Physics A: Materials Science & Processing
• 出版年：2008
• 出版时间：June, 2008
• 年：2008
• 卷：91
• 期：3
• 页码：529-533
• 全文大小：350.9 KB
• 刊物类别：Physics and Astronomy
• 刊物主题：Physics
  Condensed Matter
  Optical and Electronic Materials
  Nanotechnology
  Characterization and Evaluation Materials
  Surfaces and Interfaces and Thin Films
  Operating Procedures and Materials Treatment
  
• 出版者：Springer Berlin / Heidelberg
• ISSN：1432-0630

文摘

Tetrahedral amorphous carbon (ta-C) films deposited using a filtered cathodic vacuum arc (FCVA) system, have high intrinsic stress which limits their application as protective coatings. To reduce the film stress and to improve the adhesion, a multilayer structure is deposited at a gradient substrate negative bias from 1500 V to 80 V. This paper investigates the stress, microstructure and nano-mechanical properties of graded multilayer ta-C film on Si substrates. Compared with that of single-layer films deposited at optimised bias, the graded multilayer film has low stress without a decline in hardness and Young’s modulus. Microstructural evaluation of the multilayer film using visible Raman spectra shows that the average content of the sp3 bonds of the multilayer film remain at a high level. Nanoscratch testing illustrates favorable scratch resistance and good adhesion of the multilayer film. Scanning electron microscope (SEM) observation confirms the collapse of the film surface along the scratching trace. Finally, deposition on single crystal germanium substrates of a durable coating ∼ 1100 nm thick, and composed of three graded multilayer films is demonstrated.