Improved dielectric breakdown strength of Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ferroelectric ceramics with the addition of CuO
详细信息 查看全文
- 作者：Junxia Wang ; Xuefeng Chen ; Jin Wang…
- 刊名：Journal of Materials Science: Materials in Electronics
- 出版年：2015
- 出版时间：October 2015
- 年：2015
- 卷：26
- 期：10
- 页码：8207-8211
- 全文大小：833 KB
- 参考文献：1.P.C. Lysne, C.M. Percival, J. Appl. Phys. 46, 1519鈥?525 (1975)CrossRef
2.R.E. Setchell, J. Appl. Phys. 97, 013507鈥?13516 (2005)CrossRef
3.L. Gao, J.X. Wang, S.Y. Yang, B. Qian, J. Mater. Sci. Mater. Electron. 24, 1664鈥?669 (2012)CrossRef
4.R.H. Dungan, L.J. Storz, J. Am. Ceram. Soc. 68, 530鈥?33 (1985)CrossRef
5.S.I. Shkuratov, E.F. Talantsev, J. Baird, J. Appl. Phys. 110, 024113鈥?24115 (2011)CrossRef
6.S.I. Shkuratov, J. Baird, E.F. Talantsev, Appl. Phys. Lett. 102, 052906 (2013)CrossRef
7.T. Tani, M. Asai, K. Takatori, N. Kamiya, J. Ceram. Soc. Jpn. 105, 308鈥?11 (1997)CrossRef
8.K. Yamashita, K. Koumoto, M. Takata, H. Yanagida, Jpn. J. Appl. Phys. 19, 867鈥?71 (1980)CrossRef
9.T. Tunkasiri, G. Rujijanagul, J. Mater. Sci. Lett. 15, 1767鈥?769 (1996)CrossRef
10.R.V. Shende, D.S. Krueger, G.A. Rossetti, S.J. Lombardo, J. Am. Ceram. Soc. 84, 1648鈥?650 (2001)CrossRef
11.B.C. Shin, S.C. Kim, C.W. Nahm, S.J. Jang, Mater. Lett. 50, 82鈥?6 (2001)CrossRef
12.Q.M. Zhang, L. Wang, J. Luo, Q. Tang, J. Du, J. Am. Ceram. Soc. 92, 1871鈥?873 (2009)CrossRef
13.F.P. Zhang, H.L. He, J.M. Du, H.Y. Wang, G.M. Liu, J. Inorg. Mater. 20, 1019鈥?024 (2005)
14.H.C. Nie, N.B. Feng, X.F. Chen, G.S. Wang, X.L. Dong, Y. Gu, H.L. He, Y.S. Liu, J. Am. Ceram. Soc. 93, 642鈥?45 (2010)CrossRef
15.H. Yang, C. Luo, X.L. Dong, S. Chen, Y. Zhang, Y.L. Wang, J. Mater. Sci. 42, 817鈥?23 (2007)CrossRef
16.J.X. Wang, G.S. Wang, H.C. Nie, X.F. Chen, F. Cao, X.L. Dong, Y. Gu, H.L. He, J. Am. Ceram. Soc. 96, 2370鈥?373 (2013)CrossRef
17.C.W. Ahn, H.C. Song, S. Nahm, S. Priya, J. Am. Ceram. Soc. 89, 921鈥?25 (2006)CrossRef
18.Z.W. Yin, Dielectric Physics (Science Press, Beijing, 2003)
19.E.K. Beauchamp, J. Am. Ceram. Soc. 54, 484鈥?87 (1971)CrossRef
20.Q. Zou, H. Ruda, B.G. Yacobi, M. Farrell, Thin Solid Films 402, 65鈥?0 (2002)CrossRef
21.L.L. Ltgilbers, J. Baird, B.L. Freeman, C.S. Lynch, S.I. Shkuratov, Explosive Pulsed Power (Imperial College Press, London, 2011) - 作者单位：Junxia Wang (1) (2)
Xuefeng Chen (2)
Jin Wang (1)
Genshui Wang (2)
Hengchang Nie (2)
Fei Cao (2)
Xianlin Dong (2)
1. State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang, 621010, China
2. Key Laboratory of Inorganic Functional Materials and Devices, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China - 刊物类别：Chemistry and Materials Science
- 刊物主题：Chemistry
Optical and Electronic Materials
Characterization and Evaluation Materials - 出版者：Springer New York
- ISSN：1573-482X
文摘
Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 (PZTN 95/5) ferroelectric ceramics were fabricated using low-temperature sintering process with the addition of CuO as sintering aid. The influence of CuO on the microstructure, breakdown strength and energy density of PZTN 95/5 ceramics were investigated. The results of the relative density and the grain size distribution show that, compared with pure PZTN 95/5 ceramics, 0.2 wt% CuO-added PZTN 95/5 ceramics show a higher density and smaller and more uniform grains. More importantly, an improved dielectric breakdown strength by 15.5 % is achieved in 0.2 wt% CuO-added samples, due to the increase of the density and the decrease of the grain size. Then, an enhanced energy density is also obtained. It is suggested that the preparation of PZTN 95/5 ferroelectric ceramics with high density and fine grains by the addition of CuO provides a promising method to improve the reliability and power output density of pulse power supplies.