Enhancement of the efficiency and stability of planar p-i-n perovskite solar cells via incorporation of an amine-modified fullerene derivative as a cathode buffer layer

详细信息    查看全文

• 作者：Xiaodong Liu ; Peng Huang ; Qingqing Dong ; Zhaowei Wang…
• 关键词：planar p ; i ; n perovskite solar cells ; cathode buffer layers ; amine ; modified fullerene derivative ; PCBDANI/LiF double CBLs ; stability
• 刊名：Science China Chemistry
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：60
• 期：1
• 页码：136-143
• 全文大小：904KB
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry/Food Science, general;
• 出版者：Science China Press
• ISSN：1869-1870
• 卷排序：60

文摘

A methanol-soluble diamine-modified fullerene derivative (denoted as PCBDANI) was applied as an efficient cathode buffer layer (CBL) in planar p-i-n perovskite solar cells (pero-SCs) based on the CH₃NH₃PbI_3–xCl_x absorber. The device with PCBDANI single CBL exhibited significantly improved performance with a power conversion efficiency (PCE) of 15.45%, which is approximately 17% higher than that of the control device without the CBL. The dramatic improvement in PCE can be attributed to the formation of an interfacial dipole at the PCBM/Al interface originating from the amine functional group and the suppression of interfacial recombination by the PCBDANI interlayer. To further improve the PCE of pero-SCs, PCBDANI/LiF double CBLs were introduced between PCBM and the top Al electrode. An impressive PCE of 15.71% was achieved, which is somewhat higher than that of the devices with LiF or PCBDANI single CBL. Besides the PCE, the long-term stability of the device with PCBDANI/LiF double CBLs is also superior to that of the device with LiF single CBL.