A computational study of DME-methanol fractions with controlling several factors on HCCI combustion

详细信息    查看全文

• 作者：Hyowon Lee ; Ocktaeck Lim
• 关键词：Homogeneous charge compression ignition ; Indicated mean effective pressure ; Pressure rise rate ; Combustion ranges ; Reaction mechanism
• 刊名：Journal of Mechanical Science and Technology
• 出版年：2016
• 出版时间：April 2016
• 年：2016
• 卷：30
• 期：4
• 页码：1931-1941
• 全文大小：2,539 KB
• 参考文献：[1]S. Sato and N. Iida, Analysis of DME homogeneous charge compression ignition combustion, SAE (2003) 2003–01-1825.
  [2]J. Lahti and J. Moskwa, Dynamic engine control for HCCI combustion, SAE International (2012) 2012–01-1133.
  [3]J. Jang, K. Yang and C. S. Bae, The effect of injection location of DME and LPG in a dual fuel HCCI engine, SAE Technical Paper (2009) 2009–01-1847.
  [4]D. Jung, O. Kwon and O. Lim, Comparison of DME HCCI operating ranges for the thermal stratification and fuel stratification based on a multi-zone model, JMST, 25 6 (2011) 1383–1890.
  [5]P. L. Kelly-Zion and J. E. Dec, A computational study of the effect of fuel type on ignition time in homogeneous charge compression ignition engine, Proc of the Combustion Institute, 28 (2000) 1187–1194.CrossRef
  [6]J. E. Dec, Advanced compression-ignition engines-understanding the in-cylinder processes, Proc. of Combustion Institute, 32 (2009) 2727–2742.CrossRef
  [7]J. Li, W. M. Yang, H. An, D. Z. Zhou, W. B. Yu, J. X. Wang and L. Li, Numerical investigation on the effect of reactivity gradient in an RCCI engine fueled with gasoline and diesel, Energy Conversion and Management, 92 (2015) 342–352.CrossRef
  [8]D. Splitter, M. Wissink, D. DelVescovo and R. Reitz, RCCI engine operation towards 60% thermal efficiency, SAE Technical, (2013) 2013–01-0279.
  [9]N. Jamsran and O. Lim, A numerical analysis of the effects of a stratified pre-mixed on homogeneous charge compression ignition combustion, JMST, 26 6 (2012) 1929–1935.
  [10]D. Z. Zhou, W. M. Yang, H. An, J. Li and C. Shu, A numerical study on RCCI engine fueled by biodiesel/methanol, Energy Conversion and Management, 89 (2015) 798–807.CrossRef
  [11]R. Hanson, S. Curran, R. Wagner and R. Reitz, Effects of biofuel blends on RCCI combustion in a light-duty, Multi Cylinder Diesel engine, SAE Int. J. Engines, 6 1 (2013) 488–503.CrossRef
  [12]A. Eliassi, L. Savadkoohi and A. Kargari, Effects of various process parameters on temperature profile of adiabatic fixed bed reactor for production of dimethyl ether (DME) from methanol, Chemical Engineering Communications, 194 11 (2007) 1495–1502.CrossRef
  [13]DME Handbook, Japan DME Forum (2006) 114–119.
  [14]J. Ingamells and R. Lindquist, Methanol as a motor fuel or a gasoline blending component, SAE Technical Paper (1975) 750123.
  [15]T. Ichimiya, K. Takahashi and Y. Fuwa, Wear mechanisms of methanol fueled engine, SAE Technical Paper (1985) 852199.
  [16]Z. Zheng, M. Yao, Z. Chen and N. Zhang, Experimental study on HCCI combustion of dimethyl ether(DME)/ methanol dual fuel, SAE paper (2004) 2004–01-2993.
  [17]M. Yao, Z. Zheng and X. Liang, A numerical study on the chemical reaction kinetics of DME/methanol for HCCI combustion process, SAE paper (2006) 2006-01-1521.CrossRef
  [18]T. D. Pedersen, J. Schramm, T. Tanai and T. Sato, Controlling the heat release in HCCI combustion of DME with methanol and EGR, SAE Paper (2010) 2010-01-1489.CrossRef
  [19]K. Kuwahara and H. Ando, Role of heat accumulation by reaction loop initiated by H2O2 decomposition for thermal ignition, SAE paper (2007) 2007-01-0908.CrossRef
  [20]H. Ando, Y. Sakai and K. Kuwahara, Universal rule of hydrocarbon oxidation, SAE Paper (2009) 2009-01-0948.CrossRef
  [21]O. Kwon and O. Lim, Effect of boost pressure on thermal stratification in HCCI engine using the multi-zone model, JMST, 24 (2010) 399–406.
  [22]D. W. Jung and N. Iida, A computational study of the combined effects of EGR and boost pressure on HCCI autoignition, SAE International (2012) 2012–32-0076.
  [23]H. J. Curran, S. L. Fischer and F. L. Dryer, The reaction kinetics of dimethyl ether. II: Low-Temperature Pyrolysis and Oxidation in Flow Reactors, Int. J. Chem. Kinet., Lawrence Livermore National Laboratory, Livermore, CA, UCRL-JC-239496, 32 (2000) 741–759.
  [24]H. J. Curran, S. L. Fischer and F. L. Dryer, Chemical kinetic mechanism of dimethyl ether, Lawrence Livermore National Laboratory, Livermore, https://​www-pls.​llnl.​gov/​?​url=​ science_and_technology-chemistry (2000).
  [25]C. K. Westbrook and F. L. Dryer, Comprehensive mechanism for methanol oxidation, Combustion Science and Technology, 20 (3-4) (1978) 125–140.CrossRef
  [26]J. A. Eng, Characterization of pressure waves in HCCI combustion, SAE International (2002) 2002–01-2859.
  [27]DME Handbook, Japan DME Forum (2006) 73–75.
  
• 作者单位：Hyowon Lee (1)
  Ocktaeck Lim (2)
  
  1. Graduate School of Mechanical Engineering, University of Ulsan, Ulsan, 689-749, Korea
  2. Department of Mechanical Engineering, University of Ulsan, Ulsan, 689-749, Korea
  
• 刊物类别：Engineering
• 刊物主题：Mechanical Engineering
  Structural Mechanics
  Control Engineering
  Industrial and Production Engineering
  
• 出版者：The Korean Society of Mechanical Engineers
• ISSN：1976-3824

文摘

Two-stage fuel and single stage fuel have different effects on ignition delay and other combustion characteristics. If we mix two fuels with variable fractions, combustion characteristics will be represented with dependence on the fraction. We first investigated the change of combustion characteristics and combustion ranges by dimethyl ether (DME)/methanol fraction, IVC temperature and IVC pressure. By increasing methanol fraction, Heat release rate (HRR) showed higher rate than the case containing less methanol after 1250 K. However, it didn’t mean that Accumulated heat release (AHR) was also higher than the cases which contained less methanol. AHR of D90/M10 was the first case which surpassed AHR of D100 at about 1808K, and D80/M20 surpassed D100 at about 2318K. The result was caused by change of reaction mechanism and the change was remarkably shown in the Thermal ignition preparation (TIP) range and the Thermal ignition (TI) range. Above all, strengthened H₂O₂ Loop reactions affected heat production to increase in TIP range, and also one of the loop reactions, CH₂O + OH = HCO + H₂O, quickly produced formyl radical with increase of net reaction rate by methanol. Those results naturally led to higher reaction rates of HCO-CO-CO₂ oxidation with higher heat production. As a result, D50/M50 case showed the highest maximum Pressure rise rate (PRR). Furthermore, dispersion rate of PRR was increased by increasing methanol fraction in the range which was from back end of TIP to forepart of TI range. Finally, we focused the reaction paths of two fuels and the production and consumption rate of main radicals on the basis of combustion ranges such as LTO, Negative temperature coefficient (NTC), Thermal ignition preparation (TIP) and Thermal ignition (TI) to understand the results of this study.