用户名: 密码: 验证码:
Synchronous Full-Field Strain and Temperature Measurement in Tensile Tests at Low, Intermediate and High Strain Rates
详细信息    查看全文
  • 作者:J.D. Seidt ; V-T. Kuokkala ; J.L. Smith ; A. Gilat
  • 关键词:Plasticity ; Strain rate ; Temperature ; Full ; field IR measurement ; DIC
  • 刊名:Experimental Mechanics
  • 出版年:2017
  • 出版时间:February 2017
  • 年:2017
  • 卷:57
  • 期:2
  • 页码:219-229
  • 全文大小:
  • 刊物类别:Engineering
  • 刊物主题:Continuum Mechanics and Mechanics of Materials; Characterization and Evaluation of Materials; Optics, Lasers, Photonics, Optical Devices; Structural Mechanics; Vibration, Dynamical Systems, Control; C
  • 出版者:Springer US
  • ISSN:1741-2765
  • 卷排序:57
文摘
Tensile tests with simultaneous full-field strain and temperature measurements at the nominal strain rates of 0.01, 0.1, 1, 200 and 3000 s−1 are presented. Three different testing methods with specimens of the same thin and flat gage-section geometry are utilized. The full-field deformation is measured on one side of the specimen, using the DIC technique with low and high speed visible cameras, and the full-field temperature is measured on the opposite side using an IR camera. Austenitic stainless steel is used as the test material. The results show that a similar deformation pattern evolves at all strain rates with an initial uniform deformation up to the strain of 0.25–0.35, followed by necking with localized deformation with a maximum strain of 0.7–0.95. The strain rate in the necking regions can exceed three times the nominal strain rate. The duration of the tests vary from 57 s at the lowest strain rate to 197 μs at the highest strain rate. The results show temperature rise at all strain rates. The temperature rise increases with strain rate as the test duration shortens and there is less time for the heat to dissipate. At a strain rate of 0.01 s−1 the temperature rise is small (up to 48 °C) but noticeable. At a strain rate of 0.1 the temperature rises up to 140 °C and at a strain rate of 1 s−1 up to 260 °C. The temperature increase in the tests at strain rates of 200 s−1 and 3000 s−1 is nearly the same with the maximum temperature reaching 375 °C.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700