Freon (CHF ₃)-assisted atomization for the determination of titanium using ultrasonic slurry sampling¨Cgraphite furnace atomic absorption spectrometry (USS¨CGFAAS): a simple and advantage

详细信息    查看全文

• 作者：Alemayehu Asfaw and Grethe Wibetoe
• 关键词：GFAAS ; Titanium ; Carbide formation ; Memory effect ; Slurry sampling ; Freon ; 23
• 刊名：Analytical and Bioanalytical Chemistry
• 出版年：2004
• 出版时间：June 2004
• 年：2004
• 卷：379
• 期：3
• 页码：526-531
• 全文大小：275 KB

文摘

A simple and advantageous method for the determination of titanium using graphite furnace atomic absorption spectrometry with slurry sampling has been developed. Titanium is one of the refractory elements that form thermally stable carbides in the graphite tube, which leads to severe memory effects. Trifluoromethane (Freon-23) was applied in the purge gas during the atomization step or alternatively just prior to the atomization to successfully eliminate the problems of carbide formation and increase the lifetime of the furnace tube which could be used for more than 600 heating cycles. A flow rate of 40 mL min–1 (5 % of Freon in argon) was used to obtain symmetrical peaks with no tailing. However, when the gas flow rate was too high (250 mL min–1) the peak-tailing and memory effects reappeared. Ti was determined in various materials covering a wide range of concentrations, from 2.8 g g–1 to 12 % (m/m) Ti. The accuracy of the method was confirmed by analyzing certified reference materials (CRMs) or by comparing the results with those obtained using inductively coupled plasma–atomic emission spectrometry (ICP–AES) after decomposition of the samples. The materials analyzed were soil, plant, human hair, coal, urban particulate matters, toothpaste, and powdered paint.