Research on Magnetic Model of Low Resistance Permanent Magnet Pipe Belt Conveyor

详细信息    查看全文

• 作者：Shuang Wang ; De-yong Li ; Yong-cun Guo
• 刊名：3D Research
• 出版年：2016
• 出版时间：September 2016
• 年：2016
• 卷：7
• 期：3
• 全文大小：1,772 KB
• 刊物类别：Engineering
• 刊物主题：Computer Imaging, Vision, Pattern Recognition and Graphics
  Signal,Image and Speech Processing
  
• 出版者：3D Display Research Center, co-published with Springer
• ISSN：2092-6731
• 卷排序：7

文摘

In view of the feasibility of a new type of low resistance permanent magnet pipe belt conveyor, the magnetic properties of the permanent magnet magnetic pipe conveyor belt system are studied. Based on the molecular current hypothesis, the mathematical model of the three dimensional radial magnetic force of permanent magnet pipe conveyor belt was established. The mathematical model of the radial magnetic force was derived, and the influence factors of the radial magnetic force were derived. The finite element simulation of permanent magnet-magnetic pipe conveyor belt magnetic model was carried out, then the magnetic flux density distribution chart under the conditions of different remanence intensity of different permanent magnet and different lengths of the permanent magnets (along the transport direction) were obtained. The simulation results are consistent with the calculation results, which shows that the permanent magnet pipe belt conveyor is feasible. Under certain conditions, the radial magnetic force has nonlinear increase relations with residual magnetism of permanent magnet and the length of the permanent magnet (along the transport direction).KeywordsMagnetic force modelPermanent magnetPipe belt conveyorFinite element simulation