Erosion Performance of Gadolinium Zirconate-Based Thermal Barrier Coatings Processed by Suspension Plasma Spray

详细信息    查看全文

• 作者：Satyapal Mahade ; Nicholas Curry ; Stefan Björklund…
• 关键词：columnar microstructure ; erosion test ; gadolinium zirconate ; multi ; layered thermal barrier coating ; suspension plasma spray ; yttria ; stabilized zirconia
• 刊名：Journal of Thermal Spray Technology
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：26
• 期：1-2
• 页码：108-115
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Surfaces and Interfaces, Thin Films; Tribology, Corrosion and Coatings; Characterization and Evaluation of Materials; Operating Procedures, Materials Treatment; Analytical Chemistry;
• 出版者：Springer US
• ISSN：1544-1016
• 卷排序：26

文摘

7-8 wt.% Yttria-stabilized zirconia (YSZ) is the standard thermal barrier coating (TBC) material used by the gas turbines industry due to its excellent thermal and thermo-mechanical properties up to 1200 °C. The need for improvement in gas turbine efficiency has led to an increase in the turbine inlet gas temperature. However, above 1200 °C, YSZ has issues such as poor sintering resistance, poor phase stability and susceptibility to calcium magnesium alumino silicates (CMAS) degradation. Gadolinium zirconate (GZ) is considered as one of the promising top coat candidates for TBC applications at high temperatures (>1200 °C) due to its low thermal conductivity, good sintering resistance and CMAS attack resistance. Single-layer 8YSZ, double-layer GZ/YSZ and triple-layer GZdense/GZ/YSZ TBCs were deposited by suspension plasma spray (SPS) process. Microstructural analysis was carried out by scanning electron microscopy (SEM). A columnar microstructure was observed in the single-, double- and triple-layer TBCs. Phase analysis of the as-sprayed TBCs was carried out using XRD (x-ray diffraction) where a tetragonal prime phase of zirconia in the single-layer YSZ TBC and a cubic defect fluorite phase of GZ in the double and triple-layer TBCs was observed. Porosity measurements of the as-sprayed TBCs were made by water intrusion method and image analysis method. The as-sprayed GZ-based multi-layered TBCs were subjected to erosion test at room temperature, and their erosion resistance was compared with single-layer 8YSZ. It was shown that the erosion resistance of 8YSZ single-layer TBC was higher than GZ-based multi-layered TBCs. Among the multi-layered TBCs, triple-layer TBC was slightly better than double layer in terms of erosion resistance. The eroded TBCs were cold-mounted and analyzed by SEM.