Optimizing the geometric parameters of cutting edge for finishing machining of Fe-Cr-Ni stainless steel
详细信息 查看全文
- 作者：Tongkai Liao ; Feng Jiang ; Lan Yan ; Xin Cheng
- 关键词：Numerical simulation ; Finishing machining ; Comprehensive criterion ; Chip deformation coefficient ; Tool stress ; Geometric parameters of cutting edge
- 刊名：The International Journal of Advanced Manufacturing Technology
- 出版年：2017
- 出版时间：February 2017
- 年：2017
- 卷：88
- 期：5-8
- 页码：2061-2073
- 全文大小：
- 刊物类别：Engineering
- 刊物主题：Industrial and Production Engineering; Media Management; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design;
- 出版者：Springer London
- ISSN：1433-3015
- 卷排序：88
文摘
In order to optimize the geometric parameters of cutting edge for finishing machining of Fe-Cr-Ni stainless steel, a 2D finite element (FE) model of orthogonal cutting has been built with FE software AdvantEdge. The optimized methodology of cutting edge geometric parameters has been proposed based on simulated results. Then, the geometric parameters of cutting edge have been optimized based on a comprehensive criterion combining chip deformation coefficient and tool stress, where chip deformation coefficient indirectly determines the surface roughness and tool stress determines tool wear, which affect the dimensional precision of parts. The scope of rake angle is from 10° to 20°, and the scope of cutting edge radius is from 5 to 15 μm in the optimization process. The optimal rake angle for finishing machining Fe-Cr-Ni stainless steel is 16°, and the optimal cutting edge radius is 7 μm with a given relief angle of 7°.