A model for predicting chatter stability considering contact characteristic between milling cutter and workpiece

详细信息    查看全文

• 作者：Caixu Yue ; Xianli Liu ; Steven Y. Liang
• 关键词：Milling stability ; Curved surface ; Milling cutter ; Contact characteristic ; Cutter position
• 刊名：The International Journal of Advanced Manufacturing Technology
• 出版年：2017
• 出版时间：February 2017
• 年：2017
• 卷：88
• 期：5-8
• 页码：2345-2354
• 全文大小：
• 刊物类别：Engineering
• 刊物主题：Industrial and Production Engineering; Media Management; Mechanical Engineering; Computer-Aided Engineering (CAD, CAE) and Design;
• 出版者：Springer London
• ISSN：1433-3015
• 卷排序：88

文摘

It has been demonstrated that chatter has a negative effect on machined surface quality during milling process. The identification of chatter is crucial for reducing its influence on machining integrity, especially for the milling process of curved surface. Change of cutter position will cause chip thickness to vary in milling process. Therefore, different contact characteristic between milling cutter and workpiece will be brought out. Compared with the traditional predictive model, a model for predicting chatter stability considering this contact characteristic is proposed in this study. Stability lobe diagrams at different cutter positions are proposed to predict milling stability by employing full-discrete method. A series of experiments are carried out to calibrate and verify the stable lobe diagram. The predicting result is in good agreement with experimental investigation for the stability characterization of curved surface milling process. The model proposed in this study could be used to improve machined quality for curved surface.