Optimizing dynamic characteristics of NC rotary table based on electromechanical-hydraulic coupling

详细信息    查看全文

• 作者：Chunjian Yu (1108)
  Xiaodiao Huang (1108)
  Chenggang Fang (1108)
  
• 关键词：Dynamic indexing accuracy ; Electromechanical ; hydraulic coupling ; NC rotary table ; Preload optimization
• 刊名：Journal of Mechanical Science and Technology
• 出版年：2013
• 出版时间：April 2013
• 年：2013
• 卷：27
• 期：4
• 页码：1081-1088
• 全文大小：1901KB
• 参考文献：1. C. J. Yu, X. D. Huang and C. G. Fang, Research on damping and vibration characteristic of the large and precision NC rotary table, / Advanced Materials Research, (97鈥?01) (2010) 1216鈥?222.
  2. W. Y. Han, NC rotary table, / Shanghai Machine tool, (1) (2001) 62鈥?3.
  3. Z. S. Wang, / Friction compensation for high precision mechanical bearing turntable, Harbin: Harbin Institute of Technology, (2007).
  4. M. Zhao, Z. D. Huang and B. Li, Hydrostatic pressure calculation and optimization for design of beam & slide-rest guideways in heavy duty CNC vertical turning mill, / Chinese Journal of Mechanical Engineering, 20(5) (2007) 16鈥?2. CrossRef
  5. M. Zhao, Z. D. Huang and S. T. Wang, Hydrostatic pressure calculation of worktable of heavy duty CNC vertical lathe, / Journal of Mechanical Engineering, 45(9) (2009) 120鈥?26. CrossRef
  6. S. Y. Chen and J. Y. Tang, Effect of backlash on dynamics of spur gear pair system with friction and time-varying stiffness, Journal of Mechanical Engineering, 45(8) (2009) 119鈥?24. CrossRef
  7. S. Theodssiades and S. Natsiavas, Non-linear dynamics of gear-pair systems with periodic stiffness and backlash. Journal of Sound and Vibration, 229(2) (2000) 287鈥?10. CrossRef
  8. J. Wang, T. C. Lim and M. F. Li, Dynamics of a hypoid gear pair considering the effects of time-varying mesh parameters and backlash nonlinearity, Journal of Sound and Vibration, (308) (2007) 302鈥?29.
  9. M. Lorinc and L. B茅la, Control of mechanical systems with Stribeck friction and backlash, Systems & Control Letters, (58) (2009) 141鈥?47.
  10. C. J. Yu and X. D. Huang, Optimizing bearing capacity of hydrostatic main shaft bearing and worm and gear backlash on the large NC rotary table, / Journal of Nanjing University of Technology (Natural Science Edition), 33(3) (2011) 74鈥?7.
  11. C. J. Yu, X. D. Huang and H. L. Wang, Investigation on cutting power calculation method for gear milling based on BP neural network. Tool Engineering, 42(4) (2008) 62鈥?5.
  12. S. Z. Yang, / Mechanical processing handbook, Beijing: China Machine Press, (2001).
  13. Y. S. Chen, / Application of theory and design of hydrostatic bearing, Beijing: National Defence Industry Press, (1980).
  14. L. L. Liu, J. X. Jin and X. Luo, Meshing stiffness identification of a pair of micro gear involved in a precision servomechanism based on finite element analysis, / Machinery & Electronics, (3) (2001) 17鈥?0.
  15. H. Zhao, Q. Chen and K. Huang, Fractal model of normal contact stiffness between two cylinders鈥?joint interfaces, / Journal of Mechanical Engineering, 47(7) (2011) 54鈥?9.
  16. K. Menon, and K. Krishnamurthy, Control of low velocity friction and gear backlash in a machine tool feed drive system, / Mechatronics, (9) (1999) 22鈥?1.
  17. R. Merzoukia, J. A. Davilab and L. Fridmanb, Backlash phenomenon observation and identification in electromechanical system, Control Engineering Practice, (15) (2007) 447鈥?57.
  18. Y. H. Cui, Z. S. Liu and J. H. Ye, Dynamic response of geared rotor system and the effect of clearance on jump characteristics of amplitude, Chinese Journal of Mechanical Engineering, 45(7) (2009) 7鈥?6. CrossRef
  19. M. Nordina and P. O. Gutman, Controlling mechanical systems with backlash-a survey, Automatica, (38) (2002) 1633鈥?649.
  20. R. F. Li and J. J. Wang, / Gear system dynamics: Vibration, impact, noise, Science Press, Beijing, China, (1997).
  21. R. Merzouki and J. C. Cadiou, Estimation of backlash phenomenon in the electromechanical actuator, / Control Engineering Practice, (13) (2005) 973鈥?83.
  
• 作者单位：Chunjian Yu (1108)
  Xiaodiao Huang (1108)
  Chenggang Fang (1108)
  
  1108. Jiangsu Key Laboratory of Digital Manufacturing for Industrial Equipment and Control Technology, Nanjing University of Technology, Nanjing, Jiangsu province, China
  
• ISSN：1976-3824

文摘

Dynamic characteristics of NC rotary table are a guarantee of indexing accuracy, which is composed of static indexing accuracy and dynamic indexing accuracy. Static indexing accuracy can be measured directly by laser interferometer, while dynamic indexing accuracy is too difficult to obtain directly because of load-carrying and work pattern of the table. To improve supporting rigidity and dynamic indexing accuracy of the NC rotary table, ZT20SW driven by a double worm gear pair was taken as the research subject. On the platform for gear milling, preload of the brake worm could be optimized by feedback of dynamic displacement on the working plane. On the basis of load analysis, an electromechanical-hydraulic coupling model in the circumferential direction of ZT20SW was established. Simulation and experiment results altogether indicated that preload on the brake worm could reduce the negative influences of backlash on dynamic characteristic. As a result, dynamic indexing accuracy of the table can be controlled reasonably and wear of the driving worm pair falls to minimum level. On the experiment platform of ZT20SW, frictional force was set to 600N by adjusting flow of the hydrostatic guideway. If preload reached 4400N, dynamic indexing accuracy of the table was less than 0.02mm.