Stability and structure evolution in PMMA/SAN bilayer films upon solvent annealing

详细信息    查看全文

• 作者：Qiucheng Yang ; Yu Zhu ; Jichun You ; Yongjin Li
• 关键词：Dewetting ; Bilayer ; Solvent annealing ; AFM ; PMMA/SAN
• 刊名：Colloid and Polymer Science
• 出版年：2017
• 出版时间：January 2017
• 年：2017
• 卷：295
• 期：1
• 页码：181-188
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Polymer Sciences; Soft and Granular Matter, Complex Fluids and Microfluidics; Characterization and Evaluation of Materials; Physical Chemistry; Food Science; Nanotechnology and Microengineering;
• 出版者：Springer Berlin Heidelberg
• ISSN：1435-1536
• 卷排序：295

文摘

The stability of bilayer polymer films upon solvent annealing has been investigated with the help of atomic force microscopy (AFM) by taking PMMA [poly(methyl methacrylate), the upper layer] and SAN [poly(styrene-ran-acrylonitrile), the bottom layer] system as an example. Our results indicate that the stability and structure evolution depend crucially on the selectivity of the adopted annealing solvents. In the vapor of acetic acid (HAc, the selective solvent for PMMA), the upper PMMA layer dewets on the stable bottom SAN layer; upon annealing in 1, 2-dichlorobenzene (OBD, the selective solvent for SAN) vapor, the bilayer film remains stable because it is very hard for OBD molecules to penetrate and cross the upper PMMA layer. When dimethylformamide (exhibiting much higher solubility for SAN than PMMA) is used to anneal the specimen, the solvent molecules swell and cross the upper PMMA layer and enrich in the bottom SAN layer. As a result, SAN layer dewets the substrate, producing some SAN droplets while the upper PMMA is “carried” by the movement of SAN. This is the reason for the rupture of the upper film and the formation of “SAN droplets covered by PMMA islands.”