Effect of hexagonal boron nitride on high-performance polyether ether ketone composites

详细信息    查看全文

• 作者：Liu Liu ; Linghan Xiao ; Ming Li ; Xiuping Zhang ; Yanjie Chang…
• 关键词：PEEK ; h ; BN ; Thermal conductivity ; Friction ; Thermomechanical ; Hardness
• 刊名：Colloid & Polymer Science
• 出版年：2016
• 出版时间：January 2016
• 年：2016
• 卷：294
• 期：1
• 页码：127-133
• 全文大小：2,177 KB
• 参考文献：1.Gan DJ, Lu SQ, Song CS, Wang ZJ (2001) Physical properties of poly(ether ketone ketone)/mica composites: effect of filler content. Mater Lett 48:299–302CrossRef
  2.Zhang G, Schlarb AK, Tria S, Elkedim O (2008) Tensile and tribological behaviors of PEEK/nano-SiO2 composites compounded using a ball milling technique. Compos Sci Technol 68:3073–3080CrossRef
  3.Díez-Pascual AM, Xu C, Luque R (2014) Development and characterization of novel poly(ether ether ketone)/ZnO bionanocomposites. J Mater Chem 2:3065–3078CrossRef
  4.Goyal RK, Tiwari AN, Mulik UP, Negi YS (2007) Effect of aluminum nitride on thermomechanical properties of high performance PEEK. Compos Part A 38:516–524CrossRef
  5.Lai YH, Kuo MC, Huang JC, Chen M (2007) On the PEEK composites reinforced by surface-modified nano-silica. Mater Sci Eng 458:158–169CrossRef
  6.Zhou B, Ji X, Sheng Y et al (2004) Mechanical and thermal properties of poly-ether ether ketone reinforced with CaCO3. Eur Polym J 40:2357–2363CrossRef
  7.Rong C, Ma G, Zhang S et al (2010) Effect of carbon nanotubes on the mechanical properties and crystallization behavior of poly(ether ether ketone). Compos Sci Technol 70:380–386CrossRef
  8.Guoliang P, Qiang G, Aiguo T, Zhiqiang H (2008) Mechanical behaviors of Al2O3 nanoparticles reinforced polyetheretherketone. Mater Sci Eng 492:383–391CrossRef
  9.Zhai T, Di L, Yang D (2013) Study on the pretreatment of poly(ether ether ketone)/multiwalled carbon nanotubes composites through environmentally friendly chemical etching and electrical properties of the chemically metallized composites. ACS Appl Mater Inter 5:12499–12509CrossRef
  10.Goyal R, Tiwari A, Mulik U, Negi Y (2007) Novel high performance Al2O3/poly(ether ether ketone) nanocomposites for electronics applications. Compos Sci Technol 67:1802–1812CrossRef
  11.Naffakh M, Diez-Pascual AM, Gomez-Fatou MA (2011) New hybrid nanocomposites containing carbon nanotubes, inorganic fullerene-like WS2 nanoparticles and poly(ether ether ketone) (PEEK). J Mater Chem 21:7425–7433CrossRef
  12.Naffakh M, Diez-Pascual AM, Marco C et al (2010) Novel melt-processable poly(ether ether ketone)(PEEK)/inorganic fullerene-like WS2 nanoparticles for critical applications. J Phys Chem B 114:11444–11453CrossRef
  13.Yang LL, Zhang SL, Chen Z et al (2014) Design and preparation of graphene/poly(ether ether ketone) composites with excellent electrical conductivity. J Mater Sci 49:2372–2382CrossRef
  14.McCook NL, Hamilton MA, Burris DL, Sawyer WG (2007) Tribological results of PEEK nanocomposites in dry sliding against 440C in various gas environments. Wear 262:1511–1515CrossRef
  15.Korzekwa J, Skoneczny W, Dercz G, Bara M (2014) Wear mechanism of Al2O3/WS2 With PEEK/BG plastic. J Tribol 136:11601–11607CrossRef
  16.Qiao H-B, Guo Q, Tian A-G et al (2007) A study on friction and wear characteristics of nanometer Al2O3 /PEEK composites under the dry sliding condition. Tribol Int 40:105–110CrossRef
  17.Wang QH, Xue QJ, Liu HW et al (1996) The effect of particle size of nanometer ZrO2 on the tribological behaviour of PEEK. Wear 198:216–219CrossRef
  18.Yao YG, Lin ZY, Li Z et al (2012) Large-scale production of two-dimensional nanosheets. J Mater Chem 22:13494–13499CrossRef
  19.Liu Z, Song L, Zhao S et al (2011) Direct growth of graphene/hexagonal boron nitride stacked layers. Nano Lett 11:2032–2037CrossRef
  20.Lin Y, Williams TV, Xu TB et al (2011) Aqueous dispersions of few-layered and monolayered hexagonal boron nitride nanosheets from sonication-assisted hydrolysis: critical role of water. J Phys Chem C 115:2679–2685CrossRef
  21.Kim KK, Hsu A, Jia XT et al (2012) Synthesis of monolayer hexagonal boron nitride on Cu foil using chemical vapor deposition. Nano Lett 12:161–166CrossRef
  22.Zeng H, Zhi C, Zhang Z et al (2010) "White graphenes": boron nitride nanoribbons via boron nitride nanotube unwrapping. Nano Lett 10:5049–5055CrossRef
  23.Li L, Li LH, Chen Y et al (2012) Mechanically activated catalyst mixing for high-yield boron nitride nanotube growth. Nanoscale Res Lett 7:417–424CrossRef
  24.Terao T, Zhi CY, Bando Y et al (2010) Alignment of boron nitride nanotubes in polymeric composite films for thermal conductivity improvement. J Phys Chem C 114:4340–4344CrossRef
  25.Li C, Bando Y, Zhi C et al (2009) Thickness-dependent bending modulus of hexagonal boron nitride nanosheets. Nanotechnology 20:385707–385713CrossRef
  26.Tharajak J, Palathai T, Sombatsompop N (2011) Tribological properties of flame sprayed hexagonal boron nitride/polyetheretherketone coatings. Adv Mater Res 410:333–336CrossRef
  27.Tharajak J, Palathai T, Sombatsompop N (2013) Scratch resistance and adhesion properties of PEEK coating filled with h-BN nanoparticles. Adv Mater Res 747:303–306CrossRef
  28.Wang QH, Xu JF, Shen WC, Xue QJ (1997) The effect of nanometer SiC filler on the tribological behavior of PEEK. Wear 209:316–321CrossRef
  29.Bakar MSA, Cheang P, Khor KA (2003) Mechanical properties of injection molded hydroxyapatite–polyetheretherketone biocomposites. Compos Sci Technol 63:421–425CrossRef
  30.Molazemhosseini A, Tourani H, Khavandi A, Eftekhari Yekta B (2013) Tribological performance of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica. Wear 303:397–404CrossRef
  
• 作者单位：Liu Liu (1)
  Linghan Xiao (1)
  Ming Li (1)
  Xiuping Zhang (1)
  Yanjie Chang (1)
  Lei Shang (1)
  Yuhui Ao (1)
  
  1. Jilin Province Key Laboratory of Carbon Fiber Development and Application, College of Chemistry and Life Science, Changchun University of Technology, Changchun, 130012, People’s Republic of China
  
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Chemistry
  Polymer Sciences
  Physical Chemistry
  Soft Matter and Complex Fluids
  Characterization and Evaluation Materials
  Food Science
  
• 出版者：Springer Berlin / Heidelberg
• ISSN：1435-1536

文摘

In this paper, we prepared and characterized nanocomposites of polyether ether ketone (PEEK) containing hexagonal boron nitride (h-BN) nanofiller from 1 to 5 wt%. Using various techniques, we studied the friction and wear properties, thermal conductivity, morphology, and mechanical and thermomechanical properties of the nanocomposites. Adding h-BN nanoparticles to the PEEK improved the properties of the resulting nanocomposites. At 5 wt% h-BN content, it exhibited optimum improvement of friction and wear properties, thermal conductivity, hardness, and storage modulus. Thus, we demonstrated that PEEK nanocomposites reinforced with h-BN have a great potential as multifunctional materials for future industrial applications.