Selective Flocculation of Iron Ore Slimes: Results of Successful Pilot Plant Trials at Tata Steel, Noamundi

详细信息    查看全文

• 作者：Venugopal Tammishetti ; Dharmendr Kumar…
• 关键词：Iron ore slimes ; Selective flocculation ; Pilot plant set up ; Starch ; Guar gum
• 刊名：Transactions of the Indian Institute of Metals
• 出版年：2017
• 出版时间：March 2017
• 年：2017
• 卷：70
• 期：2
• 页码：411-419
• 全文大小：
• 刊物类别：Chemistry and Materials Science
• 刊物主题：Metallic Materials; Materials Science, general; Tribology, Corrosion and Coatings;
• 出版者：Springer India
• ISSN：0975-1645
• 卷排序：70

文摘

A significant portion of currently mined iron ores, that is, 15–20% of run of mine ore, typically ends up as slimes—a slurry of fine particles (<45 micron) with relatively higher alumina contents (7–15% Al₂O₃). The only viable option currently is to dispose these slimes in tailing ponds for water recovery and future use. Due to increasing demand for steel and rapid consumption of high grade ores, processing and utilization of these slimes has become an urgent necessity. Traditional gravity and magnetic separation is not very effective in the ultrafine size range (less than 45 microns) and hence most of the flowsheets have a desliming step ahead of gravity and magnetic separation. Selective dispersion—flocculation is commercially proven technology to accomplish efficient separation in this size range, provided appropriate selective reagents are available. Our earlier work in TRDDC laboratories has demonstrated that selective flocculation with starch and guar gum is sufficiently selective for the reduction of alumina contents and thus this process should be scaled up for the processing of alumina rich Indian iron ore slimes. TRDDC has also designed a portable set-up which can be used to run pilot plant trials in a continuous mode onsite in the mines. The successful pilot plant trials of a selective flocculation separation process were completed by us at Noamundi mines recently. The results of these plant trials, using a portable pilot plant set up, designed by TRDDC, are summarized in this paper. The slimes sample for these plant trials, was withdrawn from one of the slimes stream at the Tata Steel’s iron ore beneficiation plant at Noamundi mines. Though there was considerable variation in the grade and pulp density of the slimes sample, it was possible to produce a concentrate of consistent quality in a continuous mode. It was for example demonstrated that one can produce a concentrate assaying 65.3% Fe and 2.5% alumina with a yield of 80.4% from a relatively richer grade slime sample containing 60.3% Fe and 4.8% alumina. More importantly, the corresponding tails contained less than 39.7% Fe. For a leaner grade slime sample assaying 53.4% Fe and 7.3% alumina, the corresponding concentrate grade was 63.5% Fe and 3.1% alumina, tailings grade 35.7% Fe and the yield achieved during the plant trials was 63.5%.