- journal_title：Clay Minerals
- Contributor：A. C. Silva ; M. C. Pereira ; L. C. A. Oliveira ; L. C. D. Cavalcante ; J. D. Fabris ; E. Murad
- Publisher：Mineralogical Society of Great Britain and Ireland
- Date：2012-
- Format：text/html
- Language：en
- Identifier：10.1180/claymin.2012.047.1.69
- journal_abbrev：Clay Minerals
- issn：0009-8558
- volume：47
- issue：1
- firstpage：69
- section：Articles
Magnetite-rich waste from a niobium mine near Araxá, State of Minas Gerais, Brazil, was heated to 500°C and 1000°C under an O2 atmosphere. The original waste and its oxidized products were characterized by energy-dispersive X-ray spectroscopy (EDS), X-ray powder diffraction (XRD), room-temperature 57Fe Mössbauer spectroscopy, thermogravimetric analysis (TG) and temperature-programmed reduction (TPR).
Semiquantitative analyses by EDS and quantitative chemical analyses showed the waste to be constituted primarily of Fe with minor amounts of Ti, Ba, Al, Si, Nb, Mn, S and P. Mössbauer and XRD showed the waste to consist predominantly of magnetite and hematite. The magnetite content decreases when the temperature increases due to its direct conversion to hematite. However, at 500°C only 10 wt.% of original magnetite was converted to hematite, confirming the high stability of this magnetite, which could still be detected at 1000°C. The TG profile shows no significant weight gain on heating, indicating a high stability of the magnetite. The TPR profiles show that the hematite in the waste is sintered after treatment at 1000°C and the reduction peaks are consequently shifted to higher temperatures. This high thermal stability is attributed to a moderate isomorphous replacement of Fe by other cations present in the Nb mining waste.