新工科背景下测控技术与仪器专业视觉检测方向课程体系构建

详细信息    查看全文 | 推荐本文 |

英文篇名：Curriculum Construction of Vision Detection for the Major of Measuring and Controlling Technology and Instrument under the Background of New Engineering 作者：张凯兵 ; 张缓缓 ; 李珣 ; 卢健 英文作者：ZHANG Kaibing;ZHANG Huanhuan;LI Xun;LU Jian;School of Electronics and Information, Xi'an Polytechnic University; 关键词：新工科 ; 测控技术与仪器专业 ; 视觉检测 ; 课程体系 英文关键词：new engineering;;major of measuring and controlling technology and instrument;;vision detection;;curriculum 中文刊名：KJDX 英文刊名：The Guide of Science & Education 机构：西安工程大学电子信息学院; 出版日期：2019-03-25 出版单位：科教导刊(下旬) 年：2019 期：No.369 基金：西安工程大学2016年本科教学改革研究项目(No.2016JG19) 语种：中文; 页：KJDX201903010 页数：3 CN：03 ISSN：42-1795/N 分类号：27-28+73

摘要

在新工科背景下,突出视觉检测方向在测控技术与仪器专业人才培养中教学地位,是高等学校应对新的技术革命和新兴产业发展,升级改造传统专业课程体系的建设举措。笔者以本校测控技术与仪器专业人才培养方案的修订为依据,详细介绍了测控技术与仪器专业视觉检测方向课程体系的构成,分析了各课程设置的必要性,为高校推进新工科建设,培养适应区域经济发展和产业转型升级的卓越工程人才提供参考。
        Under the background of new engineering, in order to gear with the new technological revolution and the development of new industries, it is a constructive measure for universities to upgrade and improve the curriculums of the traditional majors by enhancing the teaching position of vision detection in the major of measuring and controlling technology and instrument. In this paper, the authors detail the curriculum construction of vision detection for the major of measuring and controlling technology and instrument, and make an analysis of the necessary of the setting of each course, which provides a reference for universities to advance the new engineering construction and cultivate the excellent engineers so as to meet with the requirements of regional economy development and the transformation and upgrading of traditional industries.

引文

[1]陈劲松.新工科背景下电子类专业计算机类课程体系探索[J].廊坊师范学院学报(自然科学版),2018.18(3):108-111.
    [2]彭翔,邾继贵.“机器视觉检测与应用”专题前言[J].光学学报, 2018.38(8):0815000.
    [3]欧坤,陈玲.新工科背景下计算机网络专业模块化课程体系的构建研究[J].惠州学院学报,2018(3):108-111.
    [4]姚兴华,吴恒洋,方志军,等.新工科背景下机器学习课程建设研究[J].软件导刊,2018.17(1):221-223.
    [5]赵广辉.面向新工科的Python程序设计交叉融合案例教学[J].计算机教育,2017(8):23-27.
    [6]陈劲.人工智能与新工科人才培养[J].高等工程教育,2017(6):18-23.