用户名: 密码: 验证码:
无固相高密度深水隔热测试液体系的制备与性能评价
详细信息    查看全文 | 推荐本文 |
  • 英文篇名:Preparation and Performance Evaluation of Solid-free and High Density Insulating Testing Fluid for Deep Water
  • 作者:李怀科 ; 耿铁 ; 罗健生 ; 苗海龙
  • 英文作者:LI Huaike;GENG Tie;LUO Jiansheng;MIAO Hailong;Oilfield Chemicals Research Institute,China Oilfield Services Company,Ltd,CNOOC;
  • 关键词:深水 ; 测试液 ; 无固相 ; 导热系数 ; 水合物
  • 英文关键词:deepwater;;testing fluid;;solid-free;;thermal conductivity;;hydrate
  • 中文刊名:YJHX
  • 英文刊名:Oilfield Chemistry
  • 机构:中海油田服务股份有限公司油田化学研究院;
  • 出版日期:2018-10-19 17:16
  • 出版单位:油田化学
  • 年:2018
  • 期:v.35;No.137
  • 语种:中文;
  • 页:YJHX201803002
  • 页数:5
  • CN:03
  • ISSN:51-1292/TE
  • 分类号:10-14
摘要
深水高温高压油气井测试过程中,油气与隔水管段会与海水发生热传导和热交换,使井筒中流体的温度降低,易发生低温盐析和形成气体水合物的风险。针对这一问题,基于低导热系数流体可减小井筒流体和外界海水热交换的原理,通过对基液、加重剂、缓蚀剂的筛选,制得无固相高密度隔热测试液,对其导热系数、水合物抑制性、高压盐结晶和高温腐蚀性等性能进行了评价。结果表明,配方为40%数50%低导热基液LOWCTF+0.5%除氧剂HBSJ-0+0.2%数0.3%成膜缓蚀剂HBSJ-1+2%数4%钝化缓蚀剂HBSJ-2+钙盐加重、密度为1.05数1.7g/cm3的无固相高比重隔热测试液体系具有较低的导热系数(小于0.34 W/(m·K)),良好的水合物抑制性,在-30℃下不会出现结晶,良好的抗腐蚀性能,在120数180℃下对钢片的腐蚀速率为0.004数0.041 mm/a,适用于深水高温高压井作业。
        During testing process in deepwater HTHP oil and gas well,the main problem was the heat conduction and heat exchange between oil,gas,riser and outer seawater,which decreased the temperature of fluid in wellbore and easily caused salt-out and gas hydrate. Aiming at the problem and basing on the principle of heat transfer between wellbore fluid and seawater decreased by low thermal conductivity fluid,a solid-free and high density insulating testing fluid was developed through indoor selection of base fluid,aggravating agent and corrosion inhibitor. The thermal conductivity,gas hydrate inhibition,high pressure crystallization and high temperature corrosion of the fluid were studied. The results showed that the solid-free high density insulating testing fluid for deepwater HTHP well operation had low thermal conductivity that was less than 0.34 W/(m·K),good gas hydrate inhibition without crystallization at-30℃,and good corrosion resistance with 0.004—0.041 mm/a corrosion rate at 120—180℃. The solid-free high density insulating testing fluid with 1.05—1.7 g/cm3 density which was composed of 40%—50% low conductivity base fluid LOWCTF,0.5% deoxidizer HBSJ-0,0.2%—0.3% corrosion inhibitor HBSJ-1,2%—4% corrosion inhibitor HBSJ-2,and weight additive calcium salt,was suitable for the operation of deepwater HTHP wells.
引文
[1]胡文军,程玉生,李怀科,等.深水高温高压井钻井液技术[J].钻井液与完井液,2017,34(1):70-76.
    [2]郭磊,李怀科,罗健生.深水HEM高温高压钻井液体系研究与应用[J].钻采工艺,2017,40(1):99-101.
    [3]罗健生,李自立,李怀科,等. HEM深水聚胺钻井液体系的研究与应用[J].钻井液与完井液,2014,31(1):20-23.
    [4] PONTES T. Case study:downhole testing tools for formation evaluation in high-pressure and high-temperature environments[R]. SPE 12895,2010.
    [5]段泽辉,李蔚萍,孟文波,等.陵水17-2气田深水测试液类型选择[J].钻井液与完井液,2015,32(6):39-42.
    [6]岑康,江鑫,杨静,等.抑制水合物冻堵的天然气开井动态模拟研究[J].西南石油大学学报(自然科学版),2016,38(1):128-139.
    [7] AZZOLA J H,PATTILLO P D,RICHEY J F,et al. The heat transfer characteristics of vacuuminsulated tubing[R]. SPE90151,2004.
    [8] EZZAT A M,MILLER J J,EZELL R G,et al. High-performance water-based insulating packer fluids[R]. SPE 109130,2007.
    [9]樊宏伟,李振银,张远山,等.无固相水基隔热封隔液研究应用现状[J].钻井液与完井液,2014,31(3):83-88.
    [10]周姗姗,许明标,由福昌,等.深水无固相水基隔热封隔液技术[J].钻井液与完井液,2016,33(2):36-40.
    [11] ANDREW D,HOLGER U,ARNE S,et al. The development and application of environmentally acceptable thermal insulation fluids[R]. SPE 79841,2003.
    [12]何腾,刘建仪,贾春生,等.低伤害低腐蚀的无固相修井液体系研制与性能评价[J].油田化学,2017,34(1):6-10.
    [13]吴源,梅平,黄开勋.溴盐测试液腐蚀机理研究[J].湖北化工,2000,17(5):12-13.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700