非金属表面化学镀覆的研究现状
|
摘要
简述了化学镀技术的发展历程,介绍了金刚石、石墨烯、碳纤维、光纤、陶瓷等非金属材料表面化学镀金属化的最新研究动态,总结了目前存在的问题,展望了未来的发展趋势。
The development history of electroless plating technology was briefed. The advances in electroless plating on the surfaces of nonmetals such as diamond, graphene, carbon fiber, optical fiber, and ceramics were introduced. The existing problems were summarized. The development trends in future were described.
The development history of electroless plating technology was briefed. The advances in electroless plating on the surfaces of nonmetals such as diamond, graphene, carbon fiber, optical fiber, and ceramics were introduced. The existing problems were summarized. The development trends in future were described.
引文
[1]王浩,封正龙.化学镀研究现状及其应用[J].化工技术与开发,2018,47(8):37-40.
[2]徐滨士,谭俊,陈建敏.表面工程领域科学技术发展[J].中国表面工程,2011,24(2):1-12.
[3]徐旭仲,赵丹,万德成,等.钢铁表面化学镀的研究进展[J].电镀与精饰,2016,38(3):27-32,46.
[4]杨晨,刘定富.表面活性剂对化学镀镍的影响[J].电镀与环保,2015,35(2):17-20.
[5]ASHASSI-SORKHABI H,ES′HAGHI M.Corrosion resistance enhancement of electroless Ni-P coating by incorporation of ultrasonically dispersed diamond nanoparticles[J].Corrosion Science,2013,77:185-193.
[6]张丽,张彦.化学镀的研究进展及发展趋势[J].表面技术,2017,46(12):104-109.
[7]ZHAO G L,ZOU Y,ZHANG H,et al.Correlation between corrosion resistance and the local atomic structure of electroless,annealed Ni-P amorphous alloys[J].Materials Letters,2013,132:221-223.
[8]史起源.金刚石/铝复合材料上镍磷合金镀层的制备及其焊接可靠性研究[D].合肥:中国科学技术大学,2018.
[9]GUTZEIT G.Industrial nickel coating by chemical catalytic reduction[J].Transactions of the Institute of Metal Finishing,1955,33(1):383-423.
[10]KOBAYASHI Y,SALGUEIRI?O-MACEIRA V,LIZ-MARZáN L M.Deposition of silver nanoparticles on silica spheres by pretreatment steps in electroless plating[J].Chemistry of Materials,2001,13(5):1630-1633.
[11]李晓晔.AZ91D镁合金化学镀工艺研究[D].哈尔滨:哈尔滨工业大学,2013.
[12]蒋金金,吴王平,袁同心,等.硅表面化学镀镍研究[J].电镀与精饰,2017,39(10):16-22,30.
[13]姚文历.光纤光栅表面金属化工艺研究[D].济南:山东大学,2013.
[14]高洪江.外加磁场对不同基体材料表面化学镀工艺的影响研究[D].青岛:青岛科技大学,2016.
[15]姜晓霞,沈伟.化学镀理论及实践[M].北京:国防工业出版社,2000:1-7.
[16]JACKSON B,MACARY R,SHAWHAN G.Low phosphorus electroless nickel coating technology[J].Transactions of the Institute of Metal Finishing,1990,68(3):75-83.
[17]赵翠玲.Ni-Cu-P三元化学镀及Ni-Cu-P基梯度复合化学镀研究[D].广州:华南理工大学,2016.
[18]李家明,徐淑庆,梁铭忠.化学镀工艺在电子工业中的应用现状[J].电镀与精饰,2016,38(1):20-24.
[19]谢强强.化学镀Ni-P-MoS2复合镀层及其磨损行为的研究[D].南京:江苏大学,2016.
[20]栗晓龙.金刚石表面镀覆层对金属结合剂金刚石工具性能影响[D].郑州:河南工业大学,2018.
[21]UYSAL M,AKBULUT H,TOKUR M,et al.Structural and sliding wear properties of Ag/Graphene/WC hybrid nanocomposites produced by electroless codeposition[J].Journal of Alloys and Compounds,2016,654:185-195.
[22]FANG M,HU L,YANG L,et al.Electroless plating and growth kinetics of Ni-P alloy film on SiCp/Al composite with high SiC volume fraction[J].Transactions of Nonferrous Metals Society of China,2016,26(3):799-805.
[23]丁小龙,胡振峰,金国,等.轻质碳材料应用于复合镀的研究现状[J].电镀与涂饰,2017,36(11):604-608.
[24]王树元,李晓箐.金刚石化学镀镍预处理工艺的改进[J].电镀与精饰,2017,39(11):5-8.
[25]闫建明.金刚石/铜复合材料的界面调控和导热性能研究[D].郑州:郑州大学,2018.
[26]汪丽凯,郭绍义,洪金坤,等.金刚石表面化学镀铜工艺研究[J].浙江理工大学学报,2015,33(1):67-72.
[27]姚丹,李成威,韩凯新,等.人造金刚石表面化学镀W/Ni-P层的工艺优选及镀层质量[J].材料保护,2015,48(1):30-32,56.
[28]WARNER J H,SCH?FFEL F,BACHMATIUK A,等.石墨烯:基础及新兴应用[M].付磊,曾梦琪,译.北京:科学出版社,2015.
[29]LI X L,WANG X R,ZHANG L,et al.Chemically derived,ultrasmooth graphene nanoribbon semiconductors[J].Science,2008,319(5867):1229-1232.
[30]暴宁钟,白凤娟,何大方.石墨烯新材料发展现状与研发应用挑战[J].中国工业和信息化,2018(8):47-54.
[31]张丽芳,魏伟,吕伟,等.石墨烯基宏观体:制备、性质及潜在应用[J].新型炭材料,2013,28(3):161-171.
[32]王宏勋,王承志,曹洪祥,等.三维石墨烯表面化学镀Cu改性工艺研究[J].沈阳理工大学学报,2017,36(2):78-83.
[33]龚文照,陈成猛,高建国,等.热膨胀石墨烯表面化学镀纳米镍[J].新型炭材料,2014,29(6):432-437.
[34]胡庆华,王玺堂,陈浩,等.Synthesis of Ni/graphene sheets by an electroless Ni-plating method[J].新型碳材料,2012,27(1):35-41.
[35]方建军,李素芳,查文珂,等.镀镍石墨烯的微波吸收性能[J].无机材料学报,2011,26(5):467-471.
[36]TAGHIOSKOUI M.Trends in graphene research[J].Materials Today,2009,12(10):34-37.
[37]孙书杰,刘秀军,冯志海,等.碳纤维表面化学镀的研究进展[J].材料导报,2014,28(5):42-46.
[38]PARK S J,JANG Y S,RHEE K Y.Interlaminar and ductile characteristics of carbon fibers-reinforced plastics produced by nanoscaled electroless nickel plating on carbon fiber surfaces[J].Journal of Colloid and Interface Science,2002,245:383-390.
[39]ARAI S,ENDO M,HASHIZUME S,et al.Nickel-coated carbon nanofibers prepared by electroless deposition[J].Electrochemistry Communications,2004,6(10):1029-1031.
[40]赵璐,郭永,白云峰,等.螺旋碳纤维化学镀镍及其电磁参数研究[J].山西大同大学学报(自然科学版),2011,27(2):34-36,53.
[41]侯鑫,刘贵林,陈慧玉,等.碳纤维表面化学镀钴-镍合金工艺研究[J].电镀与涂饰,2016,35(4):174-178.
[42]刘艺,王华.碳纤维表面化学镀铜工艺优化研究[J].铸造技术,2018,39(7):1607-1611.
[43]刘铁根,王双,江俊峰,等.航空航天光纤传感技术研究进展[J].仪器仪表学报,2014,35(8):1681-1692.
[44]HSIAO T C,HSIEH T S,CHEN Y C,et al.Metal-coated fiber Bragg grating for dynamic temperature sensor[J].Optik,2016,127(22):10740-10745.
[45]彭健,杨郭,周宇.稀土元素对光纤表面化学镀镍的影响[J].广州化工,2010,38(11):87-88,134.
[46]朱月红,文继华.光纤光栅表面化学镀镍及影响镀层性能的因素[J].表面技术,2018,47(7):241-245.
[47]姚文历,管从胜,王静,等.光纤光栅金属化工艺及特性研究[J].光电技术应用,2012,27(6):46-50,54.
[48]王裕波.光纤传感器激光焊接封装及其热压传感特性[D].南昌:南昌大学,2017.
[49]杨珂,李玉龙,李学文.镀镍光纤抗拉强度及其影响因素[J].激光与红外,2018,48(6):769-774.
[50]季伟,傅正义.特种陶瓷材料快速烧结新技术研究[J].中国材料进展,2018,37(9):662-670.
[51]赵林南.压电陶瓷表面化学镀Ni-Cu-P合金镀层及其性能研究[D].济南:济南大学,2016.
[52]卢泽龙,罗来马,黄新民,等.激光辐照诱导氧化铝陶瓷基板表面化学镀铜[J].材料热处理学报,2014,35(10):184-188.
[53]崔开放,钟良,龚伟,等.激光活化参数对塑料表面通过化学镀铜制备电子线路的影响[J].电镀与涂饰,2018,37(9):381-385.
[54]郑晓辉,单冬冬,宋皓,等.氧化铝陶瓷表面化学镀镍工艺及镀层性能研究[J].表面技术,2017,46(10):128-134.
[55]沈祖俊,刘剑虹,王超会,等.麦饭石陶瓷表面化学镀钯沉积速率的研究[J].齐齐哈尔大学学报(自然科学版),2016,32(1):56-59.
[56]陈晓宇,曹林洪.钛酸钡陶瓷表面化学镀铜工艺及性能研究[J].广东化工,2015,42(23):8-10,7.
[2]徐滨士,谭俊,陈建敏.表面工程领域科学技术发展[J].中国表面工程,2011,24(2):1-12.
[3]徐旭仲,赵丹,万德成,等.钢铁表面化学镀的研究进展[J].电镀与精饰,2016,38(3):27-32,46.
[4]杨晨,刘定富.表面活性剂对化学镀镍的影响[J].电镀与环保,2015,35(2):17-20.
[5]ASHASSI-SORKHABI H,ES′HAGHI M.Corrosion resistance enhancement of electroless Ni-P coating by incorporation of ultrasonically dispersed diamond nanoparticles[J].Corrosion Science,2013,77:185-193.
[6]张丽,张彦.化学镀的研究进展及发展趋势[J].表面技术,2017,46(12):104-109.
[7]ZHAO G L,ZOU Y,ZHANG H,et al.Correlation between corrosion resistance and the local atomic structure of electroless,annealed Ni-P amorphous alloys[J].Materials Letters,2013,132:221-223.
[8]史起源.金刚石/铝复合材料上镍磷合金镀层的制备及其焊接可靠性研究[D].合肥:中国科学技术大学,2018.
[9]GUTZEIT G.Industrial nickel coating by chemical catalytic reduction[J].Transactions of the Institute of Metal Finishing,1955,33(1):383-423.
[10]KOBAYASHI Y,SALGUEIRI?O-MACEIRA V,LIZ-MARZáN L M.Deposition of silver nanoparticles on silica spheres by pretreatment steps in electroless plating[J].Chemistry of Materials,2001,13(5):1630-1633.
[11]李晓晔.AZ91D镁合金化学镀工艺研究[D].哈尔滨:哈尔滨工业大学,2013.
[12]蒋金金,吴王平,袁同心,等.硅表面化学镀镍研究[J].电镀与精饰,2017,39(10):16-22,30.
[13]姚文历.光纤光栅表面金属化工艺研究[D].济南:山东大学,2013.
[14]高洪江.外加磁场对不同基体材料表面化学镀工艺的影响研究[D].青岛:青岛科技大学,2016.
[15]姜晓霞,沈伟.化学镀理论及实践[M].北京:国防工业出版社,2000:1-7.
[16]JACKSON B,MACARY R,SHAWHAN G.Low phosphorus electroless nickel coating technology[J].Transactions of the Institute of Metal Finishing,1990,68(3):75-83.
[17]赵翠玲.Ni-Cu-P三元化学镀及Ni-Cu-P基梯度复合化学镀研究[D].广州:华南理工大学,2016.
[18]李家明,徐淑庆,梁铭忠.化学镀工艺在电子工业中的应用现状[J].电镀与精饰,2016,38(1):20-24.
[19]谢强强.化学镀Ni-P-MoS2复合镀层及其磨损行为的研究[D].南京:江苏大学,2016.
[20]栗晓龙.金刚石表面镀覆层对金属结合剂金刚石工具性能影响[D].郑州:河南工业大学,2018.
[21]UYSAL M,AKBULUT H,TOKUR M,et al.Structural and sliding wear properties of Ag/Graphene/WC hybrid nanocomposites produced by electroless codeposition[J].Journal of Alloys and Compounds,2016,654:185-195.
[22]FANG M,HU L,YANG L,et al.Electroless plating and growth kinetics of Ni-P alloy film on SiCp/Al composite with high SiC volume fraction[J].Transactions of Nonferrous Metals Society of China,2016,26(3):799-805.
[23]丁小龙,胡振峰,金国,等.轻质碳材料应用于复合镀的研究现状[J].电镀与涂饰,2017,36(11):604-608.
[24]王树元,李晓箐.金刚石化学镀镍预处理工艺的改进[J].电镀与精饰,2017,39(11):5-8.
[25]闫建明.金刚石/铜复合材料的界面调控和导热性能研究[D].郑州:郑州大学,2018.
[26]汪丽凯,郭绍义,洪金坤,等.金刚石表面化学镀铜工艺研究[J].浙江理工大学学报,2015,33(1):67-72.
[27]姚丹,李成威,韩凯新,等.人造金刚石表面化学镀W/Ni-P层的工艺优选及镀层质量[J].材料保护,2015,48(1):30-32,56.
[28]WARNER J H,SCH?FFEL F,BACHMATIUK A,等.石墨烯:基础及新兴应用[M].付磊,曾梦琪,译.北京:科学出版社,2015.
[29]LI X L,WANG X R,ZHANG L,et al.Chemically derived,ultrasmooth graphene nanoribbon semiconductors[J].Science,2008,319(5867):1229-1232.
[30]暴宁钟,白凤娟,何大方.石墨烯新材料发展现状与研发应用挑战[J].中国工业和信息化,2018(8):47-54.
[31]张丽芳,魏伟,吕伟,等.石墨烯基宏观体:制备、性质及潜在应用[J].新型炭材料,2013,28(3):161-171.
[32]王宏勋,王承志,曹洪祥,等.三维石墨烯表面化学镀Cu改性工艺研究[J].沈阳理工大学学报,2017,36(2):78-83.
[33]龚文照,陈成猛,高建国,等.热膨胀石墨烯表面化学镀纳米镍[J].新型炭材料,2014,29(6):432-437.
[34]胡庆华,王玺堂,陈浩,等.Synthesis of Ni/graphene sheets by an electroless Ni-plating method[J].新型碳材料,2012,27(1):35-41.
[35]方建军,李素芳,查文珂,等.镀镍石墨烯的微波吸收性能[J].无机材料学报,2011,26(5):467-471.
[36]TAGHIOSKOUI M.Trends in graphene research[J].Materials Today,2009,12(10):34-37.
[37]孙书杰,刘秀军,冯志海,等.碳纤维表面化学镀的研究进展[J].材料导报,2014,28(5):42-46.
[38]PARK S J,JANG Y S,RHEE K Y.Interlaminar and ductile characteristics of carbon fibers-reinforced plastics produced by nanoscaled electroless nickel plating on carbon fiber surfaces[J].Journal of Colloid and Interface Science,2002,245:383-390.
[39]ARAI S,ENDO M,HASHIZUME S,et al.Nickel-coated carbon nanofibers prepared by electroless deposition[J].Electrochemistry Communications,2004,6(10):1029-1031.
[40]赵璐,郭永,白云峰,等.螺旋碳纤维化学镀镍及其电磁参数研究[J].山西大同大学学报(自然科学版),2011,27(2):34-36,53.
[41]侯鑫,刘贵林,陈慧玉,等.碳纤维表面化学镀钴-镍合金工艺研究[J].电镀与涂饰,2016,35(4):174-178.
[42]刘艺,王华.碳纤维表面化学镀铜工艺优化研究[J].铸造技术,2018,39(7):1607-1611.
[43]刘铁根,王双,江俊峰,等.航空航天光纤传感技术研究进展[J].仪器仪表学报,2014,35(8):1681-1692.
[44]HSIAO T C,HSIEH T S,CHEN Y C,et al.Metal-coated fiber Bragg grating for dynamic temperature sensor[J].Optik,2016,127(22):10740-10745.
[45]彭健,杨郭,周宇.稀土元素对光纤表面化学镀镍的影响[J].广州化工,2010,38(11):87-88,134.
[46]朱月红,文继华.光纤光栅表面化学镀镍及影响镀层性能的因素[J].表面技术,2018,47(7):241-245.
[47]姚文历,管从胜,王静,等.光纤光栅金属化工艺及特性研究[J].光电技术应用,2012,27(6):46-50,54.
[48]王裕波.光纤传感器激光焊接封装及其热压传感特性[D].南昌:南昌大学,2017.
[49]杨珂,李玉龙,李学文.镀镍光纤抗拉强度及其影响因素[J].激光与红外,2018,48(6):769-774.
[50]季伟,傅正义.特种陶瓷材料快速烧结新技术研究[J].中国材料进展,2018,37(9):662-670.
[51]赵林南.压电陶瓷表面化学镀Ni-Cu-P合金镀层及其性能研究[D].济南:济南大学,2016.
[52]卢泽龙,罗来马,黄新民,等.激光辐照诱导氧化铝陶瓷基板表面化学镀铜[J].材料热处理学报,2014,35(10):184-188.
[53]崔开放,钟良,龚伟,等.激光活化参数对塑料表面通过化学镀铜制备电子线路的影响[J].电镀与涂饰,2018,37(9):381-385.
[54]郑晓辉,单冬冬,宋皓,等.氧化铝陶瓷表面化学镀镍工艺及镀层性能研究[J].表面技术,2017,46(10):128-134.
[55]沈祖俊,刘剑虹,王超会,等.麦饭石陶瓷表面化学镀钯沉积速率的研究[J].齐齐哈尔大学学报(自然科学版),2016,32(1):56-59.
[56]陈晓宇,曹林洪.钛酸钡陶瓷表面化学镀铜工艺及性能研究[J].广东化工,2015,42(23):8-10,7.