滑轮磨损试验设备的研制
详细信息 查看官网全文
- 英文论文题名：Design of Pulley Abrasion Test Equipment
- 论文作者：郝少维
- 英文论文作者：Hao Shaowei ; Harbin Aircraft Industry Group CO.LTD.
- 年：2016
- 作者机构：哈尔滨飞机工业集团有限责任公司;
- 论文关键词：滑轮磨损 ; 曲柄摇杆 ; 偏心距
- 英文论文关键词：pulley abrasion ; crank rocker ; linear eccentricity
- 会议召开时间：2016-10-31
- 会议录名称：探索 创新 交流（第7集）——第七届中国航空学会青年科技论坛文集（上册）
- 英文会议录名称：Discovery,Innovation and Communication——Proceedings of 7th CSAA Science and Technology Youth Forum
- 语种：中文
- 分类号：V216.8
- 学会代码：ZGHU
- 会议名称：探索 创新 交流（第7集）——第七届中国航空学会青年科技论坛
- 会议地点：中国广东中山
- 主办单位：中国航空学会
- 学会名称：中国航空学会
- 页数：6
- 文件大小：1459k
- 原文格式：O
- 会议级别：全国
摘要
本文主要介绍了滑轮磨损试验设备设计过程中的技术难点与解决途径,以及此类试验设备设计的推广和应用。该试验设备的设计重点是如何根据不同直径的滑轮及试验所用不同直径的钢丝绳,快速调整参数,对滑轮进行磨损试验。试验设备的主体采用曲柄摇杆机构,以实现对滑轮的往复磨损。曲柄部分采用偏心轮结构,通过快速改变偏心距,驱动摇杆实现不同摆角,从而达到钢丝绳行程的不同。试验设备设计的难点是找到曲柄长度与摇杆摆角的函数关系式,从而解决试验设备更换滑轮、钢丝绳时,快速调整曲柄长度问题。
This essay mainly introduces the technical difficulties and solutions in the design process of the pulley abrasion test equipment and popularization and application of this kinds of test equipment.The design of the test equipment is focused on how to adjusting parameters to adapt different diameter pulley and armoured rope.The main body of the test equipment adopts a crank rocker mechanism to realize the reciprocating abrasion of the pulley.The crank portion adopts the eccentric structure to drive rocker to achieve different swing angle by changing the linear eccentricity,in order to achieve the different armoured rope travel.The difficulty of the design of the test equipment is to find the function relationship between the crank length and the swing angle of the rocker in order to solve the problem of rapid adjustment of the crank length.
This essay mainly introduces the technical difficulties and solutions in the design process of the pulley abrasion test equipment and popularization and application of this kinds of test equipment.The design of the test equipment is focused on how to adjusting parameters to adapt different diameter pulley and armoured rope.The main body of the test equipment adopts a crank rocker mechanism to realize the reciprocating abrasion of the pulley.The crank portion adopts the eccentric structure to drive rocker to achieve different swing angle by changing the linear eccentricity,in order to achieve the different armoured rope travel.The difficulty of the design of the test equipment is to find the function relationship between the crank length and the swing angle of the rocker in order to solve the problem of rapid adjustment of the crank length.
引文
[1]西北工业大学机械原理及机械零件教研室编.机械原理(第6版)[M].北京:高等教育出版社,2004:188-191.
[2]西北工业大学机械原理及机械零件教研室编.机械原理(第6版)[M].北京:高等教育出版社,2004:200.
[2]西北工业大学机械原理及机械零件教研室编.机械原理(第6版)[M].北京:高等教育出版社,2004:200.