铜厂铜矿三维可视化建模及露天境界优化技术研究
|
摘要
合理确定露天矿开采境界是露天开采设计的一项重要工作,其目的就是使整个矿床开采所获的经济效益最优。采用传统手工法确定露天矿开采境界,设计计算工作量大,无法全面考虑资源开采技术及经济条件指标等因素对境界优化的影响,很难得到合理的最终开采境界。随着计算机技术的发展,矿业界研究学者提出采用计算机圈定境界的方法,常见的方法有:二维动态规划法和三维图论法、浮动圆锥法、三维动态规划法、网络最大流法、正锥删除法等,其中以浮动圆锥法和LG图论法应用最为广泛。这些计算机优化方法都是在应用地质统计学方法建立的矿床块段模型基础上实现的。
本文在对矿床三维可视化建模及露天境界优化技术的研究现状、发展趋势和存在问题进行分析的基础上,重点对矿床实体建模及境界优化等关键技术进行了研究,建立了易门铜厂铜矿的矿床三维可视化经济模型。并采用LG图论法对不同时期及不同市场条件下铜金属价格的最终开采境界进行了优化。本论文的主要研究工作及成果如下:
1、在查阅大量文献的基础上对矿床三维可视化建模及露天境界优化技术现状、发展趋势及存在的问题进行了系统分析研究。
2、在对铜厂铜矿原始建模资料进行了数据转换、矢量化等研究工作的基础上,建立了整个矿山的地表模型、矿床实体模型、岩层及断层实体模型。建立地质体模型为矿山提供了一个动态管理的数据库,解决了“海量”的原始工程图纸保存困难的问题;为地质工作者宏观上把握矿床成矿分布规律提供了依据,改变了传统的设计思维模式。
3、采用地质块段建模技术及地质统计学原理建立了矿床铜元素空间分布的品位模型,并按《固体矿产资源/储量分类》新方法对矿床储量进行重新的分类统计,实现了与国外市场经济国家矿产资源分类的接轨,适应了我国矿业投资体制的改革,切合了市场经济体制的要求,而且提高勘探投资的效益,避免了探矿资金的浪费。
4、采用LG图论法,得到了不同市场条件不同铜金属价格等因素影响下的多种开采境界设计方案,为铜厂铜矿露天开采设计提供了依据。
通过本次研究表明,采用LG图论法能快速、准确的优化出铜厂铜矿最佳露天开采境界。虽然计算机不能替代矿山设计者的分析和设计,但能帮助对一个新设计进行快速评价,极大的提高了矿山工作者的工作效率,是矿山可持续化发展的技术保障。
Specifying a rational open pit is the key link of open pit mining design, the purpose of which is to maximize economic benefits of the whole deposit obtained from mining.It is difficult to obtain a rational ultimate open pit by traditional manual methods because of the large workload of design and calculation,which make it difficult to take the effect of technical and economic index of resource mining on pit optimization into full consideration. With the development of computer science,the mining researchers have put forward new ways to get optimal open pit boundary by using computer:such as 2D dynamic programming,3D graph theory method,floating cone method, 3D dynamic programming,the Maximum Flow in Network,positive cone punctured method and so on,among which,Floating Cone method and L-G Graph Theory Method are the most commonly used ones.All the methods are based on economic block model of ore body built according to geological statistics theory.
Based on the analysis of the present situation,developing trends and the existing problems of 3D visualization simulation technology and Open Pit Mining Optimization Technology,this paper we give a discussion and study on relevant key technical issues in the deposit modeling and open pit optimization,have built a 3D economic visualization model suit for evaluation of mine resources and geological environment of Yimen Tongchang Copper Mine,and analyzed the different ultimate open pit defined by different copper prices under different market conditions and in different periods with the principle of L-G Graph Theory Methods.The main content of this paper are as follows:
1.A comprehensive analysis of the present situation,developing trends and the existing problems of 3D visualization simulation technology and Open Pit Mining Limit Optimization Technology was carried out based on previous documentations.
2.Topographic model,deposit solid model,rock and fault solid model are built based on the study on data permutation and vectorization of original modeling data of Tongchang Copper Mine.Geological Object modeling has provided a dynamic database,effectively solved the problem in storing the original design drawings,and the same time,offered basis for geologists to macroscopically understand the distribution and mineralization of deposit and to change traditional thinking mode.
3.Grade model which represents the spatial distribution of Cu has been built with the adoption of geo-block modeling technology and geo-statistics theory;meanwhile,reclassification of deposit reserve was carried out according to the new methods illustrated in Solid Mineral Resources/ Reserves Classification,the results of which show that the classification can be joint with oversea market,it is suit for the demands of reform in mine investment system and market economy,and moreover,it can enhance the efficiency of exploration investment and avoid exploration capital waste.
4.Various ultimate open pits designs defined by different copper prices under different market conditions and in different periods are obtained with the principle of L-G Graph Theory Methods,which provide basis for open pit design of Tongchang Copper Mine.
The study indicates that the LG method was proved to be a accurate, fast and simple method to define the optimal pit limit.Though computer can not be a substitute for the analysis and design of the mining designers,it is helpful in mining fast evaluation of a new design and in increasing work efficiency of mining designers;therefore,it is the guarantee of enterprise's sustainable development.
本文在对矿床三维可视化建模及露天境界优化技术的研究现状、发展趋势和存在问题进行分析的基础上,重点对矿床实体建模及境界优化等关键技术进行了研究,建立了易门铜厂铜矿的矿床三维可视化经济模型。并采用LG图论法对不同时期及不同市场条件下铜金属价格的最终开采境界进行了优化。本论文的主要研究工作及成果如下:
1、在查阅大量文献的基础上对矿床三维可视化建模及露天境界优化技术现状、发展趋势及存在的问题进行了系统分析研究。
2、在对铜厂铜矿原始建模资料进行了数据转换、矢量化等研究工作的基础上,建立了整个矿山的地表模型、矿床实体模型、岩层及断层实体模型。建立地质体模型为矿山提供了一个动态管理的数据库,解决了“海量”的原始工程图纸保存困难的问题;为地质工作者宏观上把握矿床成矿分布规律提供了依据,改变了传统的设计思维模式。
3、采用地质块段建模技术及地质统计学原理建立了矿床铜元素空间分布的品位模型,并按《固体矿产资源/储量分类》新方法对矿床储量进行重新的分类统计,实现了与国外市场经济国家矿产资源分类的接轨,适应了我国矿业投资体制的改革,切合了市场经济体制的要求,而且提高勘探投资的效益,避免了探矿资金的浪费。
4、采用LG图论法,得到了不同市场条件不同铜金属价格等因素影响下的多种开采境界设计方案,为铜厂铜矿露天开采设计提供了依据。
通过本次研究表明,采用LG图论法能快速、准确的优化出铜厂铜矿最佳露天开采境界。虽然计算机不能替代矿山设计者的分析和设计,但能帮助对一个新设计进行快速评价,极大的提高了矿山工作者的工作效率,是矿山可持续化发展的技术保障。
Specifying a rational open pit is the key link of open pit mining design, the purpose of which is to maximize economic benefits of the whole deposit obtained from mining.It is difficult to obtain a rational ultimate open pit by traditional manual methods because of the large workload of design and calculation,which make it difficult to take the effect of technical and economic index of resource mining on pit optimization into full consideration. With the development of computer science,the mining researchers have put forward new ways to get optimal open pit boundary by using computer:such as 2D dynamic programming,3D graph theory method,floating cone method, 3D dynamic programming,the Maximum Flow in Network,positive cone punctured method and so on,among which,Floating Cone method and L-G Graph Theory Method are the most commonly used ones.All the methods are based on economic block model of ore body built according to geological statistics theory.
Based on the analysis of the present situation,developing trends and the existing problems of 3D visualization simulation technology and Open Pit Mining Optimization Technology,this paper we give a discussion and study on relevant key technical issues in the deposit modeling and open pit optimization,have built a 3D economic visualization model suit for evaluation of mine resources and geological environment of Yimen Tongchang Copper Mine,and analyzed the different ultimate open pit defined by different copper prices under different market conditions and in different periods with the principle of L-G Graph Theory Methods.The main content of this paper are as follows:
1.A comprehensive analysis of the present situation,developing trends and the existing problems of 3D visualization simulation technology and Open Pit Mining Limit Optimization Technology was carried out based on previous documentations.
2.Topographic model,deposit solid model,rock and fault solid model are built based on the study on data permutation and vectorization of original modeling data of Tongchang Copper Mine.Geological Object modeling has provided a dynamic database,effectively solved the problem in storing the original design drawings,and the same time,offered basis for geologists to macroscopically understand the distribution and mineralization of deposit and to change traditional thinking mode.
3.Grade model which represents the spatial distribution of Cu has been built with the adoption of geo-block modeling technology and geo-statistics theory;meanwhile,reclassification of deposit reserve was carried out according to the new methods illustrated in Solid Mineral Resources/ Reserves Classification,the results of which show that the classification can be joint with oversea market,it is suit for the demands of reform in mine investment system and market economy,and moreover,it can enhance the efficiency of exploration investment and avoid exploration capital waste.
4.Various ultimate open pits designs defined by different copper prices under different market conditions and in different periods are obtained with the principle of L-G Graph Theory Methods,which provide basis for open pit design of Tongchang Copper Mine.
The study indicates that the LG method was proved to be a accurate, fast and simple method to define the optimal pit limit.Though computer can not be a substitute for the analysis and design of the mining designers,it is helpful in mining fast evaluation of a new design and in increasing work efficiency of mining designers;therefore,it is the guarantee of enterprise's sustainable development.
引文
[1]赵静波.露天矿采运系统模拟的建立及模拟方法研究.硕士论文.2001
[2]唐泽圣.科学计算可视化及其应用[N]。计算机世界报,1998,6,29
[3]石教英.面向21世纪的可视化技术展望[N].计算机世界报,1998
[4]孙家广,杨长贵.计算机图形学[M].北京清华大学出版社,1995
[5]石教英,蔡文立编著.科学计算可视化算法与系统.北京:科学出版社,1996
[6]Simon W Houlding.3D geoscience modeling-computer techniques for geological characterization.Springer-Verlag,1994
[7]张力岩.数字矿山中三维地质模拟与体视化研究:[硕士学位论文].北京:中国科学院遥感应用研究所:2004
[8]毕思文.数字地球—地球系统数字,北京:地质出版社,2001,10.
[9]毕思文,殷作如等.数字矿山的概念、框架、内涵及应用示范.科技道报,2004,6:39-63。
[10]李仲学,李翠平.矿床仿真及体视化技术,计算机仿真,2000(5):6-8
[11]李翠平,李仲学,赵文广.矿床的体视化及仿真系统框架.金属矿山,2001(10):44-48
[12]李翠平,李仲学,胡乃联.矿床体视化的一种空间规则体数据生成方法,北京科技大学学报,2002(6):589-592
[13]潘炜,刘大安,郭华锋等.向家坝水电站Ⅶ坝址三维地质建模研究.岩土工程学报,2005,11(11):1317-1322
[14]僧德文,李仲学,李春民等.矿床的三维可视化仿真技术与系统.北京科大学学报,2004,10(5):453-456
[15]Lerchs,H.,and Grossmann IIF1,"Optimum Design of Open-Pit Mines",Trans,CIM,1965,68:17-24
[16]Pana,M1T1,"The Simulation Approach to Open Pit Desing",Proc,5th APCOM,1965
[17]Johnson,T1B1,"Optimum Open-Pit Mine Production Scheduling",A Decade of Digital Computing in the Mineral Industry,SME,AIME,1969:539-562
[18]江家谱.金川三维矿山模型的研究与建立:[工程硕士论文].昆明:昆明理工大学:2005;
[19]吴立新,朱旺喜,张瑞新,数字矿山与我们未来矿山发展.科学导报,2004,729-32.
[20]朱训.世纪之交的中国矿业.中国矿业,1999(专):3-6.
[21]冯夏庭等.21世纪的采矿—智能采矿.中国矿业,1999(专):77-79.
[22]吴立新.数字地球、数字中国与数字矿区.矿山测量:,2000(1)6-9
[23]吴立新,殷作如,邓智毅等.论21世纪的矿山—数字矿山.煤炭学报,2000,25(4):337-342
[24]吴立新,殷作如.数字矿山构想与关键技术.中国矿业联合会年会暨首届国际矿业博览会论文集,中国矿业(专刊)2001.77-85
[25]刘廷安.自动化矿山-21世纪矿业技术的主旋律.国外金属矿山.2000,1:1-6
[26]GB/T17766-1999,《固体矿产资源/储量分类》[S].
[27]GB/T13908-2002,《固体矿产地质勘查规范准则》[S].
[28]龚元翔,王李管等.金川Ⅲ矿区复杂地质体三维可视化建模技术研究[J].中国矿山工程.2007(6):8-12
[29]曾庆田,王李管,李德,.云南某铜矿资源及开采环境评价可视化建模技术研究[J].矿冶工 程,2007,27(03):15-19.
[30]谢秋生.矿山动态数据库的开发及应用[J].矿冶工程,2006(2):18-20.
[31]贾明涛,王李管.三维变异函数的稳健统计学计算方法及其应用[J].中南工业大学学报,1998,29(4)570-574.
[32]侯景儒 黄竞先编译,地质统计学的理论与方法[M].地质出版社.1990,03;
[33]孙洪泉编,地质统计学及其应用[M].中国矿业大学出版社.1990,10;
[34]侯景儒,尹镇南等,实用地质统计学(空间信息统计学).地质出版社,1998,07;
[35]陈建宏,邓顺华,王李管.三维变异函数的计算及拟合.中南矿业学院学报,1994,25(6):686-690
[36]戴碧波;王李管;贾明涛等,三维数字建模技术在某铜矿山中的应用[J].地质与勘探..2007(3):97-101;
[37]曾庆田,复杂多金属矿床可视化建模及其三维采矿设计技术研究:[硕士论文].中南大学:2006;
[38]Ai T,Oosterom P Van(2001),A Map Generalization Model Based on Algebra Mapping Transformation.In:Aref W G(eds)Proceedings of the 9th ACM-GIS.Atlanta,GA.2001,21-27.
[39]Worboy,Michael F(1995),GIS:A Computing perspective,Taylor and Francis,London.1995,1-15.
[40]王殷行,刘梁,石杏喜.利用Voronoi图构建多分辨率TIN[J].计算机应用.2006(5)26:1019-1020;
[41]DELAUNAY B.Sur la sphere vide[J].Bulletin of the Academy of Sciences of the USSR,Classe desSciencesMathematiques etNa-turelles,1934,(8):793-800.
[42]宋哲,刘衍聪.GIS中TIN模型的实现算法[J].计算机应用,2003,23(12):94-96.
[43]王李管,曾庆田,贾明涛等.复杂地质构造矿床三维可视化实体建模技术.金属矿山,2006(12):49-52
[44]刘晓红,李树军等.Delaunay三角网增点生长构造法研究[J].海洋测绘.2005(3)25:48-50;
[45]L.G.Nonato,R.Minghim,M.C.F.Oliveira.A Novel Approach for Delaunay 3D Reconstruction with a Comparative Analysis in the Light of Applications.Computer Graphics 2001,20:1-14;
[46]刘进,李绍虎.断层的三维可视化建模研究[J].吉林大学学报(地球科学版).2004,34:36-39;
[47]杨国锋,赵射.3DSMAX6标准教程[M].北京:中国青年出版社,2004.1022105.
[48]管笑笑.3DSMAX6三维图形设计[M].北京:北京希望电子出版社,2003.21233.
[49]龚元翔,王李管等.基于MICROMINE系统的露天矿山三维可视化技术研究[J].中国钼业.2007,31(4):13-16
[50]陈爱兵,秦德先,张学书等.基于MICROMINE矿床三维立体模型应用[J].地质与探勘,2004,40(5):77-80;
[51]曾新平,吴健生,郑跃鹏,杨自安,张普斌.用于固体矿产勘探和开发的地质体三维可视化系统设计—基于混合数据模型[J].矿产与地质,2004(6):598-603;
[52]贾明涛,王李管.矿床建模中边界控制技术研究[J].金属矿山,1999.9(9):19-21;
[53]Isobel.Clerk,1979,Pratical Geostatistics,Applied Science Publishers Ctd,London,1-99;
[54]程世洪,维卫华,孙玉建.《固体矿产资源/储量分类》简介与分析[J].有色冶金设计与研究.2002,23(4):8-12
[55]伊拉尔斯兰,露天矿优化设计模拟模型(一)[J].矿业工程.2003(3):18-22
[56]焦玉书,用凸形分析—资源技术参数化方法确定露天开采境界[J].露天采矿技术.2003(3);1-5;
[57]王青,史维祥.采矿学[M].冶金工业出版社.2007;
[58]Lerchs H.,Grossman I.F.,Optimum design of open pit mines,Canadian Institute of Mining Bulletin,Jan.1965,68:47-54;
[59]殷剑宏,吴开亚等.图论及其算法[M].中国科学技术大学出版社,2000;
[60]Dorit Hochbaum.Graph Algorithms and Network Flows[D].Ieor 266,Fall 2003;
[61]Johnson T.B.,Optimum open2pit mine production scheduling,Adecade of digital computting in the mineral industry,New York,SME/AIME,1969:539-562
[63]石忠民.露天矿优化设计的通用准则和混合算法[J].系统工程.1998(4)20:44-50.
[2]唐泽圣.科学计算可视化及其应用[N]。计算机世界报,1998,6,29
[3]石教英.面向21世纪的可视化技术展望[N].计算机世界报,1998
[4]孙家广,杨长贵.计算机图形学[M].北京清华大学出版社,1995
[5]石教英,蔡文立编著.科学计算可视化算法与系统.北京:科学出版社,1996
[6]Simon W Houlding.3D geoscience modeling-computer techniques for geological characterization.Springer-Verlag,1994
[7]张力岩.数字矿山中三维地质模拟与体视化研究:[硕士学位论文].北京:中国科学院遥感应用研究所:2004
[8]毕思文.数字地球—地球系统数字,北京:地质出版社,2001,10.
[9]毕思文,殷作如等.数字矿山的概念、框架、内涵及应用示范.科技道报,2004,6:39-63。
[10]李仲学,李翠平.矿床仿真及体视化技术,计算机仿真,2000(5):6-8
[11]李翠平,李仲学,赵文广.矿床的体视化及仿真系统框架.金属矿山,2001(10):44-48
[12]李翠平,李仲学,胡乃联.矿床体视化的一种空间规则体数据生成方法,北京科技大学学报,2002(6):589-592
[13]潘炜,刘大安,郭华锋等.向家坝水电站Ⅶ坝址三维地质建模研究.岩土工程学报,2005,11(11):1317-1322
[14]僧德文,李仲学,李春民等.矿床的三维可视化仿真技术与系统.北京科大学学报,2004,10(5):453-456
[15]Lerchs,H.,and Grossmann IIF1,"Optimum Design of Open-Pit Mines",Trans,CIM,1965,68:17-24
[16]Pana,M1T1,"The Simulation Approach to Open Pit Desing",Proc,5th APCOM,1965
[17]Johnson,T1B1,"Optimum Open-Pit Mine Production Scheduling",A Decade of Digital Computing in the Mineral Industry,SME,AIME,1969:539-562
[18]江家谱.金川三维矿山模型的研究与建立:[工程硕士论文].昆明:昆明理工大学:2005;
[19]吴立新,朱旺喜,张瑞新,数字矿山与我们未来矿山发展.科学导报,2004,729-32.
[20]朱训.世纪之交的中国矿业.中国矿业,1999(专):3-6.
[21]冯夏庭等.21世纪的采矿—智能采矿.中国矿业,1999(专):77-79.
[22]吴立新.数字地球、数字中国与数字矿区.矿山测量:,2000(1)6-9
[23]吴立新,殷作如,邓智毅等.论21世纪的矿山—数字矿山.煤炭学报,2000,25(4):337-342
[24]吴立新,殷作如.数字矿山构想与关键技术.中国矿业联合会年会暨首届国际矿业博览会论文集,中国矿业(专刊)2001.77-85
[25]刘廷安.自动化矿山-21世纪矿业技术的主旋律.国外金属矿山.2000,1:1-6
[26]GB/T17766-1999,《固体矿产资源/储量分类》[S].
[27]GB/T13908-2002,《固体矿产地质勘查规范准则》[S].
[28]龚元翔,王李管等.金川Ⅲ矿区复杂地质体三维可视化建模技术研究[J].中国矿山工程.2007(6):8-12
[29]曾庆田,王李管,李德,.云南某铜矿资源及开采环境评价可视化建模技术研究[J].矿冶工 程,2007,27(03):15-19.
[30]谢秋生.矿山动态数据库的开发及应用[J].矿冶工程,2006(2):18-20.
[31]贾明涛,王李管.三维变异函数的稳健统计学计算方法及其应用[J].中南工业大学学报,1998,29(4)570-574.
[32]侯景儒 黄竞先编译,地质统计学的理论与方法[M].地质出版社.1990,03;
[33]孙洪泉编,地质统计学及其应用[M].中国矿业大学出版社.1990,10;
[34]侯景儒,尹镇南等,实用地质统计学(空间信息统计学).地质出版社,1998,07;
[35]陈建宏,邓顺华,王李管.三维变异函数的计算及拟合.中南矿业学院学报,1994,25(6):686-690
[36]戴碧波;王李管;贾明涛等,三维数字建模技术在某铜矿山中的应用[J].地质与勘探..2007(3):97-101;
[37]曾庆田,复杂多金属矿床可视化建模及其三维采矿设计技术研究:[硕士论文].中南大学:2006;
[38]Ai T,Oosterom P Van(2001),A Map Generalization Model Based on Algebra Mapping Transformation.In:Aref W G(eds)Proceedings of the 9th ACM-GIS.Atlanta,GA.2001,21-27.
[39]Worboy,Michael F(1995),GIS:A Computing perspective,Taylor and Francis,London.1995,1-15.
[40]王殷行,刘梁,石杏喜.利用Voronoi图构建多分辨率TIN[J].计算机应用.2006(5)26:1019-1020;
[41]DELAUNAY B.Sur la sphere vide[J].Bulletin of the Academy of Sciences of the USSR,Classe desSciencesMathematiques etNa-turelles,1934,(8):793-800.
[42]宋哲,刘衍聪.GIS中TIN模型的实现算法[J].计算机应用,2003,23(12):94-96.
[43]王李管,曾庆田,贾明涛等.复杂地质构造矿床三维可视化实体建模技术.金属矿山,2006(12):49-52
[44]刘晓红,李树军等.Delaunay三角网增点生长构造法研究[J].海洋测绘.2005(3)25:48-50;
[45]L.G.Nonato,R.Minghim,M.C.F.Oliveira.A Novel Approach for Delaunay 3D Reconstruction with a Comparative Analysis in the Light of Applications.Computer Graphics 2001,20:1-14;
[46]刘进,李绍虎.断层的三维可视化建模研究[J].吉林大学学报(地球科学版).2004,34:36-39;
[47]杨国锋,赵射.3DSMAX6标准教程[M].北京:中国青年出版社,2004.1022105.
[48]管笑笑.3DSMAX6三维图形设计[M].北京:北京希望电子出版社,2003.21233.
[49]龚元翔,王李管等.基于MICROMINE系统的露天矿山三维可视化技术研究[J].中国钼业.2007,31(4):13-16
[50]陈爱兵,秦德先,张学书等.基于MICROMINE矿床三维立体模型应用[J].地质与探勘,2004,40(5):77-80;
[51]曾新平,吴健生,郑跃鹏,杨自安,张普斌.用于固体矿产勘探和开发的地质体三维可视化系统设计—基于混合数据模型[J].矿产与地质,2004(6):598-603;
[52]贾明涛,王李管.矿床建模中边界控制技术研究[J].金属矿山,1999.9(9):19-21;
[53]Isobel.Clerk,1979,Pratical Geostatistics,Applied Science Publishers Ctd,London,1-99;
[54]程世洪,维卫华,孙玉建.《固体矿产资源/储量分类》简介与分析[J].有色冶金设计与研究.2002,23(4):8-12
[55]伊拉尔斯兰,露天矿优化设计模拟模型(一)[J].矿业工程.2003(3):18-22
[56]焦玉书,用凸形分析—资源技术参数化方法确定露天开采境界[J].露天采矿技术.2003(3);1-5;
[57]王青,史维祥.采矿学[M].冶金工业出版社.2007;
[58]Lerchs H.,Grossman I.F.,Optimum design of open pit mines,Canadian Institute of Mining Bulletin,Jan.1965,68:47-54;
[59]殷剑宏,吴开亚等.图论及其算法[M].中国科学技术大学出版社,2000;
[60]Dorit Hochbaum.Graph Algorithms and Network Flows[D].Ieor 266,Fall 2003;
[61]Johnson T.B.,Optimum open2pit mine production scheduling,Adecade of digital computting in the mineral industry,New York,SME/AIME,1969:539-562
[63]石忠民.露天矿优化设计的通用准则和混合算法[J].系统工程.1998(4)20:44-50.
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址：北京市海淀区学院路29号 邮编：100083 电话：办公室：(+86 10)66554848；文献借阅、咨询服务、科技查新：66554700 |