光栅数字检波器的研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
采用光栅谐振子为敏感元件,其输出信号以脉冲数形式输出。文中重点介绍了该传感器的工作原理和结构设计,讨论了光栅的探头形式、光栅间隙、条纹宽度和光电元件宽度的关系。
Grating Moiré fringes technique is used in geophysical prospecting, in which the sensor outputs digital signal. Grating vibrator is used as sensory unit whose output signal is counting pulses. Working principal and structure design of the grating sensor are placed emphasis on presenting. The form of grating probe, grating gap and relationship between fringe's width andphotoelectric element's width are discussed.
引文
1李淑清陶知非等.光栅莫尔条纹技术在地震波检测中应用的理论分析J.电子测量与仪器学报,20021282-1287
    2高华李淑清南忠良等.光栅地震检波器研究J.航空精密制造技术,2003,(1)
    3扬淑连曾兆香.光栅传感器的研究J.山东工程学院学报,1998122
    4雷孔成余海波.光栅传感器的优化设计J.世界制造技术与装备市场,2001,(1)P63-64
    5纪纲叶军.光栅传感器的设计要点分析J.仪表技术与传感器,1995,(4)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心