摘要
Utilisation of industrial waste materials in concrete compensates the lack of natural resources, solving the disposal problem of waste and to find alternative technique to safeguard the nature. There are a number of industrial wastes used as fully or partial replacement of coarse aggregate or fine aggregate. This review carries out a thorough assessment about industrial waste substances, which can be adequately utilised in concrete as fine aggregate substitution. This paper reviewed some of these industrial wastes like waste foundry sand, steel slag, copper slag, imperial smelting furnace slag (ISF slag), blast furnace slag, coal bottom ash, ferrochrome slag, palm oil clinker etc. Out of these materials, maximum number of experiments have been conducted using waste foundry sand and copper slag as fine aggregate replacement, but still more examinations are required for other waste materials as replacement of sand in concrete. Different physical and mechanical properties of industrial waste as well as of industrial waste concrete, in which natural sand is substituted have been reviewed and comparisons are made between them. Deflection and leaching study review are carried out additionally and compared. It can be observed that the concrete where sand is replaced by copper slag, imperial smelting furnace slag, class F fly ash exhibits improved strength and durability properties, but it’s slump increases as the rate of replacement increases in the case of copper slag and the slump decreases in the case of class F fly ash. There is a less research work reported on ferrochrome slag and palm oil clinker used as sand substitution, so it is felt that further detailed investigations are required.