摘要
We present explicit analytical solutions to problems of steady groundwater flow to a pumping well in an aquifer divided by an infinite, linear fault. The transmissivity of the aquifer is allowed to jump from one side of the fault to the other to model the juxtaposition of host rocks with different hydrologic properties caused by faulting. The fault itself is represented as a thin anisotropic inhomogeneity; this allows the fault to act as a combined conduit–barrier to groundwater flow, as is commonly described in the literature. We show that the properties of the fault may be represented exactly by two lumped parameters—fault resistance and fault conductance—and that the effects of the fault on flow in the adjacent aquifer is independent of the fault width. We consider the limiting cases of a purely leaky and a purely conductive fault where the fault domain may be replaced exactly by internal boundary conditions, and we investigate the effects of fault properties on the flow behavior in the adjacent aquifers. We demonstrate that inferring fault properties based on field observations of head in the aquifer is inherently difficult, even when the fault may be described by one of the two limiting cases. In particular, the effects of a leaky fault and a conductive fault on heads and discharges in the aquifer opposite the fault from the well, are shown to be identical in some cases.