The closed on-site fuel cycle of the brest reactors
详细信息   
摘要
The BREST fast reactor with nitride fuel and lead coolant is being developed as a reactor of new generation, which has to meet a set of requirements placed upon innovative reactors, namely efficient use of fuel resources, nuclear, radiation and environmental safety, proliferation resistance, radwaste treatment and economic efficiency. Mixed uranium-plutonium mononitride fuel composition allows supporting in BREST reactor CBR≈1. It is not required to separate plutonium to produce “fresh” fuel. Coarse recovered fuel purification of fission products is allowed (residual content of FPs may be in the range of 10−2 – 10−3 of their content in the irradiated fuel). High activity of the regenerated fuel caused by minor actinides is a radiation barrier against fuel thefts. The fuel cycle of the BREST-type reactors “burns” uranium-238, which must be added to the fuel during reprocessing. Plutonium is not extracted during reprocessing being a part of fuel composition, thus exhibiting an important nonproliferation feature.The radiation equivalence between natural uranium consumed by the BREST NPP closed system and long-lived high-level radwaste is provided by actinides (U, Pu, Am) transmutation in the fuel and long-lived products (I, Tc) transmutation in the blanket. The high-level waste must be stored for approximately 200 years to reduce its activity by the factor of about 1000.The design of the building and the entire set of the fuel cycle equipment has been completed for the demonstration BREST-OD-300 reactor, which includes all main features of the BREST-type reactor on-site closed fuel cycle.