r0010">The controllable process parameters of stir casting (namely: particle size of solute (SiC), proportion of SiC) and vacuum moulding process (namely: vacuum pressure and sand grain size) were studied to find out their affect on wear properties of AMC.
r0015">Wear was examined on ‘pin-on-disc type tribological tester’. The results of the study highlights that as regards to dry sliding wear; sand grain size, vacuum pressure, particle size, and proportion of SiC; have contributed 5.95%, 10.14%, 10.71% and 73.2%, respectively. The improvement in material performance of the AMC prepared by using VMASC was counter verified with microstructure analysis.
© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号 地址:北京市海淀区学院路29号 邮编:100083 电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700 |