Study of phosphonate addition and hydrodynamic conditions on ordinary steel corrosion inhibition in simulated cooling water

详细信息    查看全文

• 作者：R. Touir ; N. Dkhireche ; M. Ebn Touhami ; M. Sfaira ; O. Senhaji ; J.J. Robin ; B. Boutevin ; M. Cherkaoui
• 关键词：Corrosion inhibition ; PHOS ; SEM ; Ordinary steel ; Simulated cooling water ; Biocide
• 刊名：Materials Chemistry and Physics
• 出版年：2010
• 出版时间：1 July 2010
• 年：2010
• 卷：122
• 期：1
• 页码：1-9
• 全文大小：1059 K

文摘

The effect of phosphonate anion (PHOS) on the corrosion of ordinary steel in simulated cooling water has been studied using weight loss, polarization curves and electrochemical impedance spectroscopy measurements. PHOS was studied in the concentration range from 7.5 × 10⁻⁵ to 10⁻³ M. The results obtained reveal that PHOS perform excellently as corrosion inhibitor for ordinary steel in simulated cooling water. The inhibition efficiency of PHOS was increased with increasing both its concentration and water circulation velocity. These two factors seem to promote the adsorption of phosphorus and oxygen ions on the metal surface, leading to the formation of a protective layer with a greater charge transfer resistance and lower permeability.

The inhibition efficiency decreased slightly with temperature as well as hold time immersion under open circuit potential conditions. The adsorption of PHOS on ordinary steel surface obeyed Langmuir's isotherm. The effect of biocide, namely cetyltrimethylammonium bromide (CTAB), on the inhibition efficiency of PHOS has been studied, too.