Tribological properties of solid lubricants filled glass fiber reinforced polyamide 6 composites

详细信息    查看全文

• 作者：Du-Xin Li^a ; ^{liduxin@csu.edu.cn} ; ^{liduxin6404@yahoo.com} ; Yi-Lan You^a ; ^{hanbinzixuan@163.com} ; Xin Deng^b ; Wen-Juan Li^a ; Ying Xie^a
• 关键词：Polyamide ; Glass fiber ; Composites ; Solid lubricant ; Tribology properties
• 刊名：Materials and Design
• 出版年：2013
• 出版时间：April, 2013
• 年：2013
• 卷：46
• 期：Complete
• 页码：809-815
• 全文大小：945 K

文摘

The main purpose of this paper is to further optimize the tribological properties of the glass fiber reinforced PA6 (GF/PA6,15/85 by weight) for high performance friction materials using single or combinative solid lubricants such as Polytetrafluroethylene (PTFE), ultra-high molecular weight polyethylene (UHMWPE) and the combination of both of them. Various polymer blends, where GF/PA6 acts as the polymer matrix and solid lubricants as the dispersed phase were prepared by injection molding. The tribological properties of these materials and the synergism as a result of the incorporation of both PTFE and UHMWPE were investigated. The results showed that, at a load of 40 N and a velocity of 200 rpm, PTFE was effective in improving the tribological capabilities of matrix material. On the contrary, UHMWPE was not conductive to maintain the structure integrity of GF/PA6 composite and harmful to the friction and wear properties. The combination of PTFE and UHMWPE showed synergism on further reducing the friction coefficient of the composites filled with either PTFE or UHMWPE only. Effects of load and velocity on tribological behavior were also discussed. To further understand the wear mechanism, the worn surfaces were examined by scanning electron microscopy.