Experimental based full process simulation of alumina selective laser processed parts densified by cold isostatic pressing and solid state sintering

详细信息    查看全文

• 作者：Zijian Wang ; Wenting He ; Yusheng Shi ; Yisheng Zhang ; ^{zhangys_tc@163.com" class="auth_mail}
• 关键词：Selective laser processing (SLP) ; Cold isostatic pressing (CIP) ; Solid state sintering (SSS) ; Full process simulation ; Alumina
• 刊名：Journal of the European Ceramic Society
• 出版年：July, 2014
• 年：2014
• 卷：34
• 期：7
• 页码：1853-1863
• 全文大小：5053 K

文摘

The compound process of cold isostatic pressing (CIP) of alumina selective laser processed (SLP) parts and solid state sintering (SSS) and its full process simulation were realized in this paper, focusing on studying the overall deformation, relative density distribution, grain growth and sintering stress variation during the process. Especially, correlation was established between the macroscopic deformation and microscopic evolution. Model parameters for alumina are presented, which were optimized in accordance with the experimental results. CIPed part still exhibited density inhomogeneity, of which SSS tended to increase the overall density and homogenize density distribution. The sintering behavior was studied with the employment of dilatometer experiments. Furthermore, compared with conventional heating strategy, fast firing turned out to decrease sintering production time as well as drive the matter diffusion and densification process. The master sintering curve (MSC) moves upward a little under the condition of fast firing.