Room-Temperature Oxidation of Formaldehyde by Layered Manganese Oxide: Effect of Water

详细信息    查看全文

• 作者：Jinlong Wang ; Pengyi Zhang ; Jinge Li ; Chuanjia Jiang ; Rizwangul Yunus ; Jeonghyun Kim
• 刊名：Environmental Science & Technology
• 出版年：2015
• 出版时间：October 20, 2015
• 年：2015
• 卷：49
• 期：20
• 页码：12372-12379
• 全文大小：505K
• ISSN：1520-5851

文摘

Layered manganese oxide, i.e., birnessite was prepared via the reaction of potassium permanganate with ammonium oxalate. The water content in the birnessite was adjusted by drying/calcining the samples at various temperatures (30 掳C, 100 掳C, 200 掳C, 300 掳C, and 500 掳C). Thermogravimetry-mass spectroscopy showed three types of water released from birnessite, which can be ascribed to physically adsorbed H₂O, interlayer H₂O and hydroxyl, respectively. The activity of birnessite for formaldehyde oxidation was positively associated with its water content, i.e., the higher the water content, the better activity it has. In-situ DRIFTS and step scanning XRD analysis indicate that adsorbed formaldehyde, which is promoted by bonded water via hydrogen bonding, is transformed into formate and carbonate with the consumption of hydroxyl and bonded water. Both bonded water and water in air can compensate the consumed hydroxyl groups to sustain the mineralization of formaldehyde at room temperature. In addition, water in air stimulates the desorption of carbonate via water competitive adsorption, and accordingly the birnessite recovers its activity. This investigation elucidated the role of water in oxidizing formaldehyde by layered manganese oxides at room temperature, which may be helpful for the development of more efficient materials.