Synergistic Effects of Binary-Solvent Annealing for Efficient Polymer鈥揊ullerene Bulk Heterojunction Solar Cells

详细信息    查看全文

• 作者：Fu-Chiao Wu ; Yi-Hao Li ; Chieh-Jen Tsou ; Kuo-Cheng Tung ; Chia-Te Yen ; Fang-Sheng Chou ; Fu-Ching Tang ; Wei-Yang Chou ; Jrjeng Ruan ; Horng-Long Cheng
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2015
• 出版时间：September 2, 2015
• 年：2015
• 卷：7
• 期：34
• 页码：18967-18976
• 全文大小：717K
• ISSN：1944-8252

文摘

Conjugated polymer鈥揻ullerene-based bulk-heterojunction (BHJ) organic solar cells (OSCs) have attracted tremendous attention over the past two decades because of their potential to develop low-cost and easy methods to produce energy from light. The complicated microstructure and morphology with randomly organized architecture of these polymer鈥揻ullerene-based active layers (ALs) is a key factor that limits photovoltaic performance. In this study, a binary-solvent annealing (BSA) approach was established to improve the poly(3-hexylthiophene):indene-C₆₀ bisadduct-based AL for efficient BHJ-type OSCs by varying the second solvents with different boiling points (BP). Thus, we were able to change the evaporation behavior of cosolvents and consequently obtain the various microstructural properties of the AL. An in-depth study was conducted on the solvent-evaporation driven morphology of the active layer under various cosolvent conditions and its effect on the photovoltaic parameters of OSCs. Under the BSA processes, we found that the specimens with low-BP second solvents allows us to observe a more ideal AL for increasing photon absorption and efficient charge transport and collection at the respective electrodes, resulting in enhanced PCE of the corresponding OSCs. By contrast, the specimens with high-BP second solvents exhibit random microstructures, which are detrimental to charge transport and collection and lead to diminished PCE of the corresponding OSCs. By appropriately selecting the composition of a binary solvent, BSA can be employed as an easy method for the effective manipulation of the microstructures of ALs. BSA is a promising technique for the performance enhancement of not only OSCs but also other organic/polymeric-based electronic devices.