Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts

详细信息    查看全文

• 作者：Zhe Yuan ; Hong-Jie Peng ; Ting-Zheng Hou ; Jia-Qi Huang ; Cheng-Meng Chen ; Dai-Wei Wang ; Xin-Bing Cheng ; Fei Wei ; Qiang Zhang
• 刊名：Nano Letters
• 出版年：2016
• 出版时间：January 13, 2016
• 年：2016
• 卷：16
• 期：1
• 页码：519-527
• 全文大小：658K
• ISSN：1530-6992

文摘

Lithium–sulfur (Li–S) battery system is endowed with tremendous energy density, resulting from the complex sulfur electrochemistry involving multielectron redox reactions and phase transformations. Originated from the slow redox kinetics of polysulfide intermediates, the flood of polysulfides in the batteries during cycling induced low sulfur utilization, severe polarization, low energy efficiency, deteriorated polysulfide shuttle, and short cycling life. Herein, sulfiphilic cobalt disulfide (CoS₂) was incorporated into carbon/sulfur cathodes, introducing strong interaction between lithium polysulfides and CoS₂ under working conditions. The interfaces between CoS₂ and electrolyte served as strong adsorption and activation sites for polar polysulfides and therefore accelerated redox reactions of polysulfides. The high polysulfide reactivity not only guaranteed effective polarization mitigation and promoted energy efficiency by 10% but also promised high discharge capacity and stable cycling performance during 2000 cycles. A slow capacity decay rate of 0.034%/cycle at 2.0 C and a high initial capacity of 1368 mAh g^–1 at 0.5 C were achieved. Since the propelling redox reaction is not limited to Li–S system, we foresee the reported strategy herein can be applied in other high-power devices through the systems with controllable redox reactions.