Generation of Nanoparticles from Friction between Railway Brake Disks and Pads

详细信息    查看全文

• 作者：Hyeong-Gyu Namgung ; Jong-Bum Kim ; Sang-Hee Woo ; Sechan Park ; Minhae Kim ; Min-Soo Kim ; Gwi-Nam Bae ; Duckshin Park ; Soon-Bark Kwon
• 刊名：Environmental Science & Technology
• 出版年：2016
• 出版时间：April 5, 2016
• 年：2016
• 卷：50
• 期：7
• 页码：3453-3461
• 全文大小：681K
• ISSN：1520-5851

文摘

In this study, we measured the size distribution of particles ranging in size from 5.6 to 560 nm that were emitted between brake disks and pads under various braking conditions to observe and analyze changes to the resulting particle size distribution over braking time. A peak of 178–275 nm (200 nm peak) was observed in all braking conditions. However, the generation of spherical particles of a 10 nm range was observed only when the disk speed and brake force were above certain levels and intensified only when speed and brake force further increased. The total number concentration of ultrafine particles (no larger than 0.1 μm; PM_0.1) generated was found to correlate with disk speed and brake force. Thus, the generation of nanoparticles resulting from disk speed and brake force was attributable primarily to increases in the contact surface temperature. The critical temperature for the generation of nanoparticles of a 10 nm range was found to be about 70 °C, which is the average temperature between the surface and the inside of the disk. If the speed or brake force was higher, that is, the temperature of the contact surface reached a certain level, evaporation and condensation took place. Vapor then left the friction surface, met with the air, and quickly cooled to form nanoparticles through nucleation. When the newly generated particles became highly concentrated, they grew through coagulation to form agglomerates or the vapor condensed directly onto the surface of existing particles of about 200 nm (formed by mechanical friction).