用户名: 密码: 验证码:
Film and Interface Atomic Structures of Electrodeposited Co/Au(111) Layers: An in Situ X-ray Scattering Study as a Function of the Surface Chemistry and the Electrochemical Potential
详细信息    查看全文
文摘
The growth and atomic structure of thin Co films electrodeposited onto Au(111) have been studied using in situ surface X-ray diffraction (SXRD) and scanning tunneling microscopy (STM). SXRD is used to monitor the growth in real-time and, following Co deposition, the strain of the Co film is characterized as a function of the Co thickness. In-plane SXRD measurements show that Co deposition leads to the formation of a reconstructed Au layer at the Au–Co interface that is composed of an unfaulted, single Au monolayer uniformly compressed with respect to the underlying bulk Au lattice. The surface normal structure of the Au–Co interface and Co films are examined by measurement of the extended X-ray reflectivity (or specular crystal truncation rod (CTR)) for a nominally two monolayer thick (2 ML) Co deposit. In situ STM has also been used to obtain the morphology of the Co films and the Au(111) reconstruction pattern both before and after Co dissolution. The STM data give complementary information to the SXRD results. The influence on the Co structure of the adsorption of carbon monoxide is also investigated in detail for a 2–3 ML thick Co film. It is shown that CO adsorption induces small vertical relaxations in the Co layers. In contrast, varying the electrochemical potential has negligible influence on the Co structure and affects only the electrolyte layering in the electrochemical double layer. The results are discussed in relation to the magnetic properties of the Co films.

© 2004-2018 中国地质图书馆版权所有 京ICP备05064691号 京公网安备11010802017129号

地址:北京市海淀区学院路29号 邮编:100083

电话:办公室:(+86 10)66554848;文献借阅、咨询服务、科技查新:66554700