Flexible Organic Phototransistor Array with Enhanced Responsivity via Metal–Ligand Charge Transfer

详细信息    查看全文

• 作者：Xien Liu ; Eun Kwang Lee ; Dong Yeong Kim ; Hojeong Yu ; Joon Hak Oh
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：March 23, 2016
• 年：2016
• 卷：8
• 期：11
• 页码：7291-7299
• 全文大小：600K
• ISSN：1944-8252

文摘

Phototransistors based on organic photoactive materials combine tunable light absorption in the spectral region from ultraviolet to near-infrared with low-temperature processability over large areas on flexible substrates. However, they often exhibit low photoresponsivity because of low molar extinction coefficient of photoactive components. We report a simple, yet highly efficient solution method for enhancing the performance of organic phototransistors using ruthenium complex 1 (Ru-complex 1). An air-stable n-type organic semiconductor, N,N′-bis(2-phenylethyl)-perylene-3,4:9,10-tetracarboxylic diimide (BPE-PTCDI), has been deposited on a silicon wafer and a transparent polyimide (PI) substrate via thermal evaporation under vacuum. The BPE-PTCDI phototransistors functionalized with Ru-complex 1 exhibit ∼5000 times higher external quantum efficiency (EQE) than that of pristine BPE-PTCDI phototransistors, owing to the metal–ligand charge transfer (MLCT) from Ru-complex 1 to the active component of the device. In addition, a large 10 × 10 phototransistor array (2.5 × 2.5 cm²) has been prepared on a transparent PI substrate, showing distinct light mapping. The fabricated phototransistor array is highly flexible and twistable and works well under tensile and compressive strains. We believe that our simple method will pave a viable way for improvements in the photoresponsivity of organic semiconductors for applications in wearable organic optoelectronic devices.