Effect of Emulsified Water on Asphaltene Instability in Crude Oils

详细信息    查看全文

• 作者：Mohammad Tavakkoli ; Andrew Chen ; Chi-An Sung ; Kelly M. Kidder ; Je Jin Lee ; Saeed M. Alhassan ; Francisco M. Vargas
• 刊名：Energy & Fuels
• 出版年：2016
• 出版时间：May 19, 2016
• 年：2016
• 卷：30
• 期：5
• 页码：3676-3686
• 全文大小：497K
• 年卷期：0
• ISSN：1520-5029

文摘

Understanding asphaltene precipitation and subsequent deposition during oil production is of great importance for the oil industry nowadays because of the potential risk associated with this heavy fraction in plugging wellbores and production equipment. Although water is commonly present in the produced fluids, because of instrument limitations and inadequate techniques, it is usually separated from the oil prior to any experimental analysis. Therefore, the effect of water on asphaltene stability and deposition tendency is not completely understood, and the information available in the literature is scarce. In this work, the effect of emulsified water on asphaltene instability in crude oil systems is investigated. Three crude oils and one bitumen sample were used in this study. The crude oils had American Petroleum Institute (API) gravities ranging from 26° to 40° and asphaltene content between 1.2 and 13 wt %. Model oils were also prepared with asphaltenes extracted from these crude oils. A total of nine systems were investigated with and without the presence of emulsified water. It was found that, for the crude oils from the Middle East and Canada and their corresponding model oils, the addition of water did not have a significant effect on either the detection of asphaltene precipitation or the amount of precipitated asphaltenes. However, the stability of asphaltenes in the crude oil from the Gulf of Mexico and the model oils from the Athabasca bitumen (containing n-C₅ and n-C₇ asphaltenes) was significantly affected by the presence of water. The experimental evidence suggests that some asphaltenes are more prone to interact with water at the oil–water interface. This work provides a simple technique to screen whether water has an effect on asphaltene stability for a given crude oil at ambient pressure and different temperatures. With this study, we aim to contribute to a better understanding of the interaction of water and asphaltenes in crude oil systems, which will eventually lead to the development of cost-effective strategies for the mitigation of this flow assurance problem.