Three-Dimensional Polymeric Mechanical Metamaterials Fabricated by Multibeam Interference Lithography with the Assistance of Plasma Etching

详细信息    查看全文

• 作者：Da-Young Kang ; Wooju Lee ; Dongchoul Kim ; Jun Hyuk Moon
• 刊名：Langmuir
• 出版年：2016
• 出版时间：August 23, 2016
• 年：2016
• 卷：32
• 期：33
• 页码：8436-8441
• 全文大小：321K
• 年卷期：0
• ISSN：1520-5827

文摘

The pentamode structure is a type of mechanical metamaterial that displays dramatically different bulk and shear modulus responses. In this study, a face-centered cubic (FCC) polymeric microstructure was fabricated by using SU8 negative-type photoresists and multibeam interference exposure. Isotropic plasma etching is used to control the solid-volume fraction; for the first time, we obtained a structure with the minimum solid-volume fraction as low as 15% that still exhibited high structural integrity. Using this method, we reduced the width of atom-to-atom connections by up to 40 nm. We characterize the effect of the connection area on the anisotropy of the mechanical properties using simulations. Nanoindentation measurements were also conducted to evaluate the energy dissipation by varying the connection area. The Young’s/shear modulus ratio is 5 times higher for the etched microstructure than that of the bulk SU8 materials. The use of interference lithography may enable the properties of microscale materials to be engineered for various applications, such as MEMS.