Hyperthermal Intact Molecular Ions Play Key Role in Retention of ATRP Surface Initiation Capability of Plasma Polymer Films from Ethyl α-Bromoisobutyrate

详细信息    查看全文

• 作者：Solmaz Saboohi ; Bryan R. Coad ; Andrew Michelmore ; Robert D. Short ; Hans J. Griesser
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：June 29, 2016
• 年：2016
• 卷：8
• 期：25
• 页码：16493-16502
• 全文大小：444K
• 年卷期：0
• ISSN：1944-8252

文摘

We report a systematic study of the plasma polymerization of ethyl α-bromoisobutyrate (EBIB) to produce thin film coatings capable of serving as ATRP initiation surfaces, for which they must contain α-bromoisobutyryl functional groups. In the deposition of polymeric coatings by plasma polymerization there generally occurs considerable fragmentation of precursor (“monomer”) molecules in the plasma; and the retention of larger structural elements is challenging, particularly when they are inherently chemically labile. Empirical principles such as low plasma power and low pressure are usually utilized. However, we show that the α-bromoisobutyryl structural moiety is labile in a plasma gas phase and in low pressure plasma conditions, below the collisional threshold, there is little retention. At higher pressure, in contrast, fragmentation of this structural motif appears to be reduced substantially, and coatings useful for ATRP initiation were obtained. Mass spectrometry analysis of the composition of the plasma phase revealed that the desired structural moiety can be retained through the plasma, if the plasma conditions are steered toward ions of the precursor molecule. Whereas at low pressure the plasma polymer assembles mainly from various neutral (radical) fragments, at higher pressure the deposition occurs from hyperthermal ions, among which the protonated intact molecular ion is the most abundant. At higher pressure, a substantial population of ions has low kinetic energy, leading to “soft landing” and thus less fragmentation. This study demonstrates that relatively complex structural motifs in precursor molecules can be retained in plasma polymerization if the chemical and physical processes occurring in the plasma phase are elucidated and controlled such that desirable larger structural elements play a key role in the film deposition.