New Pb(Mg1/3Nb2/3)O3–Pb(In1/2Nb1/2)O3–PbZrO3–PbTiO3 Quaternary Ceramics: Morphotropic Phase Boundary Design and Electrical Properties

详细信息    查看全文

• 作者：Nengneng Luo ; Shujun Zhang ; Qiang Li ; Chao Xu ; Zhanlue Yang ; Qingfeng Yan ; Yiling Zhang ; Thomas R. Shrout
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：June 22, 2016
• 年：2016
• 卷：8
• 期：24
• 页码：15506-15517
• 全文大小：889K
• 年卷期：0
• ISSN：1944-8252

文摘

Four series of Pb(Mg_1/3Nb_2/3)O₃–Pb(In_1/2Nb_1/2)O₃–PbZrO₃–PbTiO₃ (PMN–PIN–PZ–PT) quaternary ceramics with compositions located at the morphotropic phase boundary (MPB) regions were prepared. The MPBs of the multicomponent system were predicted using a linear combination rule and experimentally confirmed by X-ray powder diffraction and electrical measurement. The positions of MPBs in multicomponent systems were found in linear correlation with the tolerance factor and ionic radii of non-PT end-members. The phase structure, piezoelectric coefficient, electromechanical coupling coefficient, unipolar strains, and dielectric properties of as-prepared ceramics were systematically investigated. The largest d₃₃s were obtained at S36.8, L37.4, M39.6, and N35.8, with the corresponding values of 580, 450, 420, and 530 pC/N, respectively, while the largest k_ps were found at S34.8, L37.4, M39.6, and N35.8, with the respective values of 0.54, 0.50, 0.47, and 0.53. The largest unipolar strain S_max and high-field piezoelectric strain coefficients d₃₃* were also observed around the respective MPB regions. The rhombohedral-to-tetragonal phase transition temperature T_rt increased with increasing PIN and PZ contents. Of particular importance is that high T_rt of 140–197 °C was achieved in the M series with PZ and PIN contents being around 0.208 and 0.158, which will broaden the temperature usage range.