Polysiloxane Functionalized Carbon Dots and Their Cross-Linked Flexible Silicone Rubbers for Color Conversion and Encapsulation of White LEDs

详细信息    查看全文

• 作者：Yunfeng Wang ; Zhengmao Yin ; Zheng Xie ; Xinxin Zhao ; Chuanjian Zhou ; Shuyun Zhou ; Ping Chen
• 刊名：ACS Applied Materials & Interfaces
• 出版年：2016
• 出版时间：April 20, 2016
• 年：2016
• 卷：8
• 期：15
• 页码：9961-9968
• 全文大小：547K
• 年卷期：0
• ISSN：1944-8252

文摘

In this work, aminopropylmethylpolysiloxane (AMS) functionalized luminescent carbon dots (AMS-CDs) were prepared via a one-step solvothermal method. AMS-CDs could be self- or co-cross-linking with AMS to form 3D flexible transparent silicone rubbers (SRs) where CDs acted as cross-linking points, so the loading fraction of AMS-CDs could be adjusted from 10 to 100 wt %, thus modulating fluorescence properties and flexibility of silicone rubbers. Because of the self-curing property and high thermal stability, AMS-CDs were also studied in white LEDs (WLEDs), serving as a color conversion and encapsulation layer of GaN based blue LEDs simultaneously that would avoid the traditional problem of poor compatibility between emitting and packaging materials. And the color coordinate of AMS-CDs based WLEDs (0.33, 0.28) was very close to the pure white light. In addition, the obtained CDs cross-linked SRs had good transparency (T > 80%) at 510–1400 nm and high refractive indexes (1.33–1.54) that could meet the need of commercial packaging materials and optical application. AMS-CDs were also promising to be used in the UV LEDs based WLEDs according to their wide wavelength emission and flexible optoelectronic device.