High-Performance PdNi Nanoalloy Catalyst in Situ Structured on Ni Foam for Catalytic Deoxygenation of Coalbed Methane: Experimental and DFT Studies

详细信息    查看全文

• 作者：Qiaofei Zhang ; Xin-Ping Wu ; Yakun Li ; Ruijuan Chai ; Guofeng Zhao ; Chunzheng Wang ; Xue-Qing Gong ; Ye Liu ; Yong Lu
• 刊名：ACS Catalysis
• 出版年：2016
• 出版时间：September 2, 2016
• 年：2016
• 卷：6
• 期：9
• 页码：6236-6245
• 全文大小：621K
• 年卷期：0
• ISSN：2155-5435

文摘

A Ni-foam-structured PdNi nanoalloy catalyst engineered from nano- to macro-scales has been successfully fabricated for the catalytic deoxygenation of coalbed methane (CBM). The catalyst was obtainable by embedment of Pd nanoparticles onto Ni-foam substrate via a galvanic exchange reaction method and subsequent in situ activation in the reaction, which was active at low temperature, selective (no CO formation), and oscillation free in this CH₄-rich catalytic combustion process. Special Pd@NiO (Pd nanoparticles partially wrapped by tiny NiO fragments) ensembles were formed in the galvanic deposition stage and could merely be transformed into PdNi nanoalloys in the real reaction stream at elevated temperatures (e.g., 450 °C or higher). Density functional theory (DFT) calculations were carried out to reveal the role of Ni decoration at Pd in PdNi nanoalloy catalyst for the CBM deoxygenation. By nature, the Pd–Ni alloying modified the electronic structure of surface Pd and led to a decrease in the O adsorption energy, which can be taken as the activity descriptor for the CBM deoxygenation. A reaction kinetic study indicated that the Ni decoration at Pd by Pd–Ni alloying lowered the apparent activation energy in comparison to the pristine Pd catalyst, while leading to an increase of the reaction order of O₂ from −0.6 at Pd catalyst to −0.3. The foam-structured PdNi nanoalloy catalyst thus offered enhanced low-temperature activity and the elimination of oscillating phenomena as the result of a transient balance obtained between the cycles of O₂ adsorption/activation and CH₄ oxidation.