Nanocomposite Membrane with Different Carbon Nanotubes Location for Nanofiltration and Forward Osmosis Applications

详细信息    查看全文

• 作者：Xiangju Song ; Li Wang ; Lili Mao ; Zhining Wang
• 刊名：ACS Sustainable Chemistry & Engineering
• 出版年：2016
• 出版时间：June 6, 2016
• 年：2016
• 卷：4
• 期：6
• 页码：2990-2997
• 全文大小：594K
• 年卷期：0
• ISSN：2168-0485

文摘

We investigated the effect of carbon nanotubes (CNTs) location on the property and performance of prepared membranes. Four different types of membranes were prepared, including (1) thin film composite (TFC, polyamide active layer on polysulfone substrate), (2) nanocomposite-supported thin film composite (nTFC, polyamide active layer on CNT-embedded polysulfone substrate), (3) thin film nanocomposite (TFN, CNT-incorporated polyamide active layer on polysulfone substrate), and (4) nanocomposite-supported thin film nanocomposite (nTFN, CNT-incorporated polyamide active layer on CNT-embedded polysulfone substrate). The water permeability followed the sequence of nTFN > TFN > nTFC > TFC. However, the rejection and salt permeability exhibited the opposite trend. The incompatibility between CNTs and polymers provided nanocorridors, through which both water and solutes could pass. The nTFN membrane exhibited the highest porosity and lowest structural parameter. Moreover, the nTFN membrane possessed the best antifouling capacity by preventing foulants to attach to the surface and clog the substrate pores. This work offered some systematic knowledge to design novel membranes with improved performance for desalination and water purification applications.