Highly Conductive Multifunctional Graphene Polycarbonate Nanocomposites

详细信息    查看全文

• 作者：Mitra Yoonessi ; James R. Gaier
• 刊名：ACS Nano
• 出版年：2010
• 出版时间：December 28, 2010
• 年：2010
• 卷：4
• 期：12
• 页码：7211-7220
• 全文大小：547K
• 年卷期：0
• ISSN：1936-086X

文摘

Graphene nanosheet−bisphenol A polycarbonate nanocomposites (0.027−2.2 vol %) prepared by both emulsion mixing and solution blending methods, followed by compression molding at 287 °C, exhibited dc electrical percolation threshold of ∼0.14 and ∼0.38 vol %, respectively. The conductivities of 2.2 vol % graphene nanocomposites were 0.512 and 0.226 S/cm for emulsion and solution mixing. The 1.1 and 2.2 vol % graphene nanocomposites exhibited frequency-independent behavior. Inherent conductivity, extremely high aspect ratio, and nanostructure directed assembly of the graphene using PC nanospheres are the main factors for excellent electrical properties of the nanocomposites. Dynamic tensile moduli of nanocomposites increased with increasing graphene in the nanocomposite. The glass transition temperatures were decreased with increasing graphene for the emulsion series. High-resolution electron microscopy (HR-TEM) and small-angle neutron scattering (SANS) showed isolated graphene with no connectivity path for insulating nanocomposites and connected nanoparticles for the conductive nanocomposites. A stacked disk model was used to obtain the average particle radius, average number of graphene layers per stack, and stack spacing by simulation of the experimental SANS data. Morphology studies indicated the presence of well-dispersed graphene and small graphene stacking with infusion of polycarbonate within the stacks.