Extended Adiabatic Flame Temperature Method for Lower Flammability Limits Prediction of Fuel-Air-Diluent Mixture by Nonstoichiometric Equation and Nitrogen Equivalent Coefficients

详细信息    查看全文

• 作者：Runzhao LiZhongchang Liu ; Yongqiang Han ; Manzhi Tan ; Yun XuJing Tian ; Jiahong Chai ; Jiahui Liu
• 刊名：Energy & Fuels
• 出版年：2017
• 出版时间：January 19, 2017
• 年：2017
• 卷：31
• 期：1
• 页码：351-361
• 全文大小：631K
• ISSN：1520-5029

文摘

The extended adiabatic flame temperature method aims at predicting the lower flammability limits of fuel-air-diluent mixtures (including fuel mixtures and diluent mixtures) by nonstoichiometric equation and nitrogen equivalent coefficients. A cubic function is introduced to describe the relation between the critical adiabatic flame temperature and inert volume concentration. This method applies to ten compounds including methane, propane, iso-octane, ethylene, acetylene, benzene, methanol, dimethyl ether, methyl formate, and acetone for validation. A good agreement is obtained between the predicted and measured values that the average relative deviations are all below 3.6%. The sources of error are mainly attributed to three causes: First, the adiabatic flame temperature method does not take into account the heat losses from flame front to surroundings. Second, the test method and determined criterion both have a significant impact on the experimental data. Third, the functional relationship between adiabatic flame temperature and inert concentration also influences the exactness.