Effect of Beaded Activated Carbon Fluidization on Adsorption of Volatile Organic Compounds

详细信息    查看全文

• 作者：Samineh Kamravaei ; Pooya Shariaty ; Masoud Jahandar Lashaki ; John D. Atkinson ; Zaher HashishoJohn H. Phillips ; James E. Anderson ; Mark Nichols
• 刊名：Industrial & Engineering Chemistry Research
• 出版年：2017
• 出版时间：February 8, 2017
• 年：2017
• 卷：56
• 期：5
• 页码：1297-1305
• 全文大小：637K
• ISSN：1520-5045

文摘

This research investigates the effect of adsorbent bed configuration on volatile organic compounds (VOCs) adsorption with beaded activated carbon (BAC). Five-cycle adsorption/desorption tests using a single VOC (1,2,4-trimethylbenzene) and a mixture of nine VOCs were completed using fixed and fluidized bed adsorber configurations. Adsorption tests were completed with full loading of the adsorbent. All regeneration tests were completed in the fixed bed arrangement. The adsorption capacity of the BAC was not affected by the adsorption bed’s configuration in case of reaching full breakthrough. For the VOC mixture, however, 30% less heel buildup was observed for the fluidized bed configuration. Higher accumulation of heavy adsorbates was found in fixed bed as opposed to fluidized bed, explaining the higher heel buildup in the former. On the other hand, improved mass transfer was found across the entire fluidized bed as a result of better gas-particle contact. These results show that, besides the expected engineering advantages of a fluidized bed adsorption system (e.g., lower pressure drop), decreased heel buildup is an additional advantage when using fluidized bed adsorption in industrial settings.