Incorporating Fluorine Substitution into Conjugated Polymers for Solar Cells: Three Different Means, Same Results

详细信息    查看全文

• 作者：Mary Allison Kelly ; Steffen Roland ; Qianqian Zhang ; Youngmin Lee ; Bernd Kabius ; Qing Wang ; Enrique D. Gomez ; Dieter Neher ; Wei You
• 刊名：Journal of Physical Chemistry C
• 出版年：2017
• 出版时间：February 2, 2017
• 年：2017
• 卷：121
• 期：4
• 页码：2059-2068
• 全文大小：517K
• ISSN：1932-7455

文摘

Fluorinating conjugated polymers is a proven strategy for creating high performance materials in polymer solar cells, yet few studies have investigated the importance of the fluorination method. We compare the performance of three fluorinated systems: a poly(benzodithieno-dithienyltriazole) (PBnDT-XTAZ) random copolymer where 50% of the acceptor units are difluorinated, PBnDT-mFTAZ where every acceptor unit is monofluorinated, and a 1:1 physical blend of the difluorinated and nonfluorinated polymer. All systems have the same degree of fluorination (50%) yet via different methods (chemically vs physically, random vs regular). We show that these three systems have equivalent photovoltaic behavior: ∼5.2% efficiency with a short-circuit current (J_sc) at ∼11 mA cm^–2, an open-circuit voltage (V_oc) at 0.77 V, and a fill factor (FF) of ∼60%. Further investigation of these three systems demonstrates that the charge generation, charge extraction, and charge transfer state are essentially identical for the three studied systems. Transmission electron microscopy shows no significant differences in the morphologies. All these data illustrate that it is possible to improve performance not only via regular or random fluorination but also by physical addition via a ternary blend. Thus, our results demonstrate the versatility of incorporating fluorine in the active layer of polymer solar cells to enhance device performance.